Stained seat belts
- Thread starter Jimmie
- Start date
HighEndDetail
New member
- Apr 29, 2006
- 1,881
- 0
Try a steam cleaner
supercharged
New member
- Mar 7, 2006
- 7,305
- 0
I think Megs APC+ 10:1 should work well on it.
Gary Sword
New member
- Nov 26, 2006
- 4,168
- 0
I recently used some DP Carpet and Upholstery Cleaner on some really dirty seat belts and it did a very nice job.
Anthony Orosco
New member
- Dec 17, 2006
- 356
- 0
Go to a store that deals in webbed materials, like a search and rescue outfitter as they use a lot of seat belt type materials, and ask them the best and SAFEST method of cleaning that type of material.
Anthony
Anthony
TOGWT
SELF BANNED
- Dec 4, 2006
- 716
- 0
Seat Belts:
Maintenance clean seat belts with a 5:1 Woolite® distilled water solution. For spot stains use a fabric cleaner (303 Cleaner & Spot Remover™)
1. Pull the belts from the retractor and gently close the door on the belt, clean and allow to air dry before opening the door and retracting the belt. Do not use bleach or strong detergents, or dye on the seat belts as this may severely weaken them and render them ineffective in a crash.
2. Once fabric is dry apply a fabric protection (303TM High Tech Fabric Guard)
3. While you are cleaning the belts, take the opportunity to closely inspect them for damage and security of attachment, ensure here are no cuts, tears or abrasions (you should always inspect for damage etc if they get caught by a closing door)
After a while the seat belt mechanism becomes slow and / or will not retract when released. This can be avoided by cleaning the upper anchor; as the seatbelt retracts it leaves behind a film of dirt, which builds up over time. But by taking a Q- tip and some Isopropyl alcohol (IPA) you can clean the seat belt anchor / retracting mechanism. Once clean add some Plexus Plastic Cleaner to provide lubrication.
Alternative products - C-28 Seat Belt Cleaner and Spot Remover from PRO® to make detailers jobs a lot easier Seat Belt Cleaner and Spot Remover is a non-flammable and non hazardous concentrated cleaner that safely removes dirt, oil, grease and stains from seat belts - Professional Car Care :: Car Care Products :: Detailing Supplies
Maintenance clean seat belts with a 5:1 Woolite® distilled water solution. For spot stains use a fabric cleaner (303 Cleaner & Spot Remover™)
1. Pull the belts from the retractor and gently close the door on the belt, clean and allow to air dry before opening the door and retracting the belt. Do not use bleach or strong detergents, or dye on the seat belts as this may severely weaken them and render them ineffective in a crash.
2. Once fabric is dry apply a fabric protection (303TM High Tech Fabric Guard)
3. While you are cleaning the belts, take the opportunity to closely inspect them for damage and security of attachment, ensure here are no cuts, tears or abrasions (you should always inspect for damage etc if they get caught by a closing door)
After a while the seat belt mechanism becomes slow and / or will not retract when released. This can be avoided by cleaning the upper anchor; as the seatbelt retracts it leaves behind a film of dirt, which builds up over time. But by taking a Q- tip and some Isopropyl alcohol (IPA) you can clean the seat belt anchor / retracting mechanism. Once clean add some Plexus Plastic Cleaner to provide lubrication.
Alternative products - C-28 Seat Belt Cleaner and Spot Remover from PRO® to make detailers jobs a lot easier Seat Belt Cleaner and Spot Remover is a non-flammable and non hazardous concentrated cleaner that safely removes dirt, oil, grease and stains from seat belts - Professional Car Care :: Car Care Products :: Detailing Supplies