The Post a Picture of Your Ride as it Sits Thread

ca8ede768725b2db235ea3ba92f8ac26.jpg


Just running some errands killing some time. Been dying to do another rinseless but it seems to shower at least once every day since the heats been here.

I bought some ultima ww, ONR wash n wax and wg uber can't wait to test out wg it's the only one I haven tried.
 
WGU is awesome! 1 ounce per 3 gallons, rare dilution rate💡

Sent from my LGLS990 using Tapatalk
 
Klasse Act said:
WGU is awesome! 1 ounce per 3 gallons, rare dilution rate��

Sent from my LGLS990 using Tapatalk
Click to expand...

Yeah that's what I hear! Everyone loves it. I think the shine ONR wash n wax leaves is pretty slick combined with their qd for drying. So I know I'm going to love wg
 
idriveblackcars said:
Yeah that's what I hear! Everyone loves it. I think the shine ONR wash n wax leaves is pretty slick combined with their qd for drying. So I know I'm going to love wg
Click to expand...
You are talking about the onr wash and wax that's Green Green, correct?

Sent from my LGLS990 using Tapatalk
 
Klasse Act said:
You are talking about the onr wash and wax that's Green Green, correct?

Sent from my LGLS990 using Tapatalk
Click to expand...

Yes correct.
070ae8874bd76560cc0b01600d6f5d4e.jpg


The shine is amazing such pop.. Great for maintenance washing. And really gives a car with no LSP a few weeks of protection imo.
 
You know... I'm starting to like N914 a little more than Uber now.... At least for a WW or QD.

(Sent via my mobile device...)
 
kevincwelch said:
You know... I'm starting to like N914 a little more than Uber now.... At least for a WW or QD.

(Sent via my mobile device...)
Click to expand...
Well Kevin on a coated vehicle its a must!

Sent from my LGLS990 using Tapatalk
 
Klasse Act said:
Well Kevin on a coated vehicle its a must!

Sent from my LGLS990 using Tapatalk
Click to expand...
I've basically given away all my quick detailers other than Kenotek and the FrankenDetailer. It just makes more sense to break out N914 or WGURW to do the cleaning between washes. Will try some ECH2O rinseless soon.

(Sent via my mobile device...)
 
kevincwelch said:
I've basically given away all my quick detailers other than Kenotek and the FrankenDetailer. It just makes more sense to break out N914 or WGURW to do the cleaning between washes. Will try some ECH2O rinseless soon.

(Sent via my mobile device...)
Click to expand...

A Frankendetailer lol I love it, sounds like a home brew
 
Well there's now old and new FrankenDetailers now, depends on whether it's coated or not.

Sent from my LGLS990 using Tapatalk
 
Where is FRANKENDETAILER found. AG does not carry this

Sent from my SM-G955U using Tapatalk
 
kevincwelch said:
You know... I'm starting to like N914 a little more than Uber now.... At least for a WW or QD.

(Sent via my mobile device...)
Click to expand...

Ok..... what the heck is N914 guys?

Ah, never mind... just looked it up. Might have to try it now that my ONR needs replacing.
 
Buster906 said:
Where is FRANKENDETAILER found. AG does not carry this

Sent from my SM-G955U using Tapatalk
Click to expand...
It's a homebrew basically.

Non-coated finishes:

I gallon of distilled water, 2-3 ounces of your favorite RW and 1-2 ounces of Klasse sealant glaze and shake well before each use. In my experience Wolfgang Uber rinseless is one of the best products to use as the base, it never separated for me when mixed together.

For coated finishes:

10 parts distilled water, 1 ounce N914 or Ech2o and 1 part Gyeon Cure or (PM me for what I'm currently using) This combo is key as the base RW doesn't leave anything behind, especially N914. Always shake well before use.

Both of these products can be use on a wet surface of dry one, doesn't matter

Sent from my LGLS990 using Tapatalk
 
Klasse Act said:
It's a homebrew basically.

Non-coated finishes:

I gallon of distilled water, 2-3 ounces of your favorite RW and 1-2 ounces of Klasse sealant glaze and shake well before each use. In my experience Wolfgang Uber rinseless is one of the best products to use as the base, it never separated for me when mixed together.

For coated finishes:

10 parts distilled water, 1 ounce N914 or Ech2o and 1 part Gyeon Cure or (PM me for what I'm currently using) This combo is key as the base RW doesn't leave anything behind, especially N914. Always shake well before use.

Both of these products can be use on a wet surface of dry one, doesn't matter

Sent from my LGLS990 using Tapatalk
Click to expand...
Thank you for the clarification. FRANKENDETAILER would be a great advertising name

Sent from my SM-G955U using Tapatalk
 
DetailKitty said:
Ok..... what the heck is N914 guys?

Ah, never mind... just looked it up. Might have to try it now that my ONR needs replacing.
Click to expand...
Monica, this is in the top 2 of current RW and WW's offered here right now (in mine as well as many others opinion)

Sent from my LGLS990 using Tapatalk
 
Buster906 said:
Thank you for the clarification. FRANKENDETAILER would be a great advertising name

Sent from my SM-G955U using Tapatalk
Click to expand...
My buddy, derek0609, came up with the name for my concoction and its funny you say this because a number of people said I should market it. Think about this, it's basically 2 current products mixed together with distilled water, how do you market that, LOL

Sent from my LGLS990 using Tapatalk
 
You must log in or register to reply here.
Back
Top