The Post a Picture of Your Ride as it Sits Thread

17” wheels?
I thought they only came with 18” wheels.
Nah.
The available OEM wheel sizes are:
17”; 18”; 20”; and 21”.


Here is one (1) [of my set of four (4)] of the
>on-the-house< OEM 17” tire/wheel assemblies
I’ll be using for the Winter months.

DBC788AC-A70D-44FB-8489-3BAA87CC2D6E.jpeg


A389B92F-8A21-4630-9E3B-48A5462FB73E.jpeg



Bob
 
Nah.
The available OEM wheel sizes are:
17”; 18”; 20”; and 21”.


Here is one (1) [of my set of four (4)] of the
>on-the-house< OEM 17” tire/wheel assemblies
I’ll be using for the Winter months.


Bob​


I knew about the 20s & optional 21s on the RS but thought the rest came with 18s. Thanks


Sent from my iPad using Tapatalk Pro​
 
Oh man, Ancient1 sorry to see this, I know how much it hurts to lose your baby in such a way in an instant. Glad you’re ok!
 
I just finished up the final coat of Zipang so now my other baby is out of commission until Sunday also. It will give me time top get my summer tires and rims cleaned and coated tho.

2019-03-22%2021.38.01-X2.jpg
 
Lost one of my babies today.

20190322_101007-X2.jpg

20190322_111557-X2.jpg
Sorry for your loss but I'm glad your able to post this meaning your OK Any plans to pull the engine and trans and put it in something else?

Sent from my SM-G950U using Tapatalk
 
New addition to the driveway. Wash, polish with Griots FastFinish MF pad and Meguiars Ultimate Polish, IPA wipe, 2 coats of Meguiars Fast Finish. Windows were cleaned, clayed and Chemical Guys Jet Seal applied. Trim was coated with Meguiars Ulitmate Protectant, tires have three coats of Turtle Wax Endura Shine. Wheels also have two coats of Meguiars Fast Finish. I did the baggie test after washing and the paint felt smooth, so I decided to go straight to polish and not risk defects from clay bar. For what it's worth, I loved the microfiber pads.
 
Love the little (pieces of wood?) to raise the tires up for an easy all around dress, too smart!! I’m gonna have to steal that ;) Pilot is looking good!!
 
New addition to the driveway. Wash, polish with Griots FastFinish MF pad and Meguiars Ultimate Polish, IPA wipe, 2 coats of Meguiars Fast Finish. Windows were cleaned, clayed and Chemical Guys Jet Seal applied. Trim was coated with Meguiars Ulitmate Protectant, tires have three coats of Turtle Wax Endura Shine. Wheels also have two coats of Meguiars Fast Finish. I did the baggie test after washing and the paint felt smooth, so I decided to go straight to polish and not risk defects from clay bar. For what it's worth, I loved the microfiber pads.
Passport?

Sent from my SM-G950U using Tapatalk
 
Love the little (pieces of wood?) to raise the tires up for an easy all around dress, too smart!! I’m gonna have to steal that ;) Pilot is looking good!!

Pressure treated 2x6. I ran them width wise today. If you don't cut the ends at a 45° angle to drive up on and they are too long, you risk them kicking up and catching the underside of the vehicle. I didn't cut them, they wont kick high enough with my truck, thus why they are sideways.
 
Pressure treated 2x6. I ran them width wise today. If you don't cut the ends at a 45° angle to drive up on and they are too long, you risk them kicking up and catching the underside of the vehicle. I didn't cut them, they wont kick high enough with my truck, thus why they are sideways.[/QUOTE]

So simple and yet very effective...thanks for sharing
 
From this morning before I head into work
1fda094ff096889f9829bae54b34e9ed.jpg


Sent from my SM-G950U using Tapatalk
 
Back
Top