The Post a Picture of Your Ride as it Sits Thread

Hello,
NICE, clean, lookin good!. I tried to post a picture of my ride but it would not go through. It may be too large. It is 4268 JPG. Would that be the reason?
Thank you!
Rich
 
I've just discovered ONR and Beadmaker...and I'm very impressed with them both. My only regret is that I didn't discover them sooner :xyxthumbs:

IMG-4736.jpg
 
I've just discovered ONR and Beadmaker...and I'm very impressed with them both. My only regret is that I didn't discover them sooner :xyxthumbs:

IMG-4736.jpg
The dirt and dullness have been "Terminated"

How did you end up using ONR?

Sent from my SM-G950U using Tapatalk
 
The dirt and dullness have been "Terminated"

How did you end up using ONR?

Sent from my SM-G950U using Tapatalk

You got jokes! :laughing:

I pre-soak the panel with a diluted mix of the ONR that I have in a hand sprayer, I then use my chenille wash mitt to clean the panel, followed by beadmaker, then dry with my drying towel.

Definitely a fan and it helps as a "quick wash" when I don't have a few hours to spend completely washing it. :)
 
That color seriously pops! Looks great!

Sent from my SM-N960U using Autogeekonline mobile app
Thank you very much, haven't even polished and coated it yet, LOL. Its had several layers of protection laid upon it from 303 Touchless sealant, Beadmaker and recently DPC Armor. I did an initial "mini detail" where I sprayed IronX, foamed that and rinsed and then applied 303 Touchless sealant and well, you know it goes from there with me

Looking forward to your next ride!

Sent from my SM-G950U using Tapatalk
 
Thank you very much, haven't even polished and coated it yet, LOL. Its had several layers of protection laid upon it from 303 Touchless sealant, Beadmaker and recently DPC Armor. I did an initial "mini detail" where I sprayed IronX, foamed that and rinsed and then applied 303 Touchless sealant and well, you know it goes from there with me

Looking forward to your next ride!

Sent from my SM-G950U using Tapatalk
I'm trying to hold out for the Hyundai Palisade, it looks amazing, but the lease is up May 9th and the Palisade comes out in July. I might have to get creative! Lol

Sent from my SM-N960U using Autogeekonline mobile app
 
I'm trying to hold out for the Hyundai Palisade, it looks amazing, but the lease is up May 9th and the Palisade comes out in July. I might have to get creative! Lol

Sent from my SM-N960U using Autogeekonline mobile app
Beater car, would make for a great story! Hell, contact your dealer and tell them the situation, maybe extend the lease 2 months

Sent from my SM-G950U using Tapatalk
 
You got jokes! :laughing:

I pre-soak the panel with a diluted mix of the ONR that I have in a hand sprayer, I then use my chenille wash mitt to clean the panel, followed by beadmaker, then dry with my drying towel.

Definitely a fan and it helps as a "quick wash" when I don't have a few hours to spend completely washing it. :)
So that's a competely waterless wash??

Sent from my ONEPLUS A6003 using Tapatalk
 
Nice to take some pics outside in the sun...before it turns white tomorrow here
3824d82a031f82b31e14a08a12b7d27e.jpg
12065f1df71b12f535e16e131498ce02.jpg
bcbc5edfa904f6edb9cdded55ffa8cac.jpg


Sent from my SM-G950U using Tapatalk

One of the nicest blue colors on a vehicle I have seen. Cant imagine it getting any more bright and vivid, love it!
 
One of the nicest blue colors on a vehicle I have seen. Cant imagine it getting any more bright and vivid, love it!
Thank you!

I must say there's no swirls in the paint, a mark about a foot long on the p/s front fender that is pretty light and some type of marks that I took out by hand, the light, foot long mark only lightened a bit but will come out with my GG6 for sure.

I'm either going to use 303 polish or Optimum hyper polish and inspect the paint to see if i even have to use a finishing polish but knowing me i will use a finishing polish and that will be 303 finishing polish without a doubt. The paint coating will be TAC system Power Plus (70% Sio2) and topper weeks later will be TAC system Moonlight and/or 1 step Master, can't wait

At that point we'll see if the products and myself were able to take the paint to the next level, stay "tuned".

Sent from my SM-G950U using Tapatalk
 
Just the two gallons I use in my bucket with the ONR mixture.

It's more of a rinseless wash ;)
2 gallons, did you pre-treat it enough, I usually make about 3 gallons. How about wash media, multiple towels in the bucket or Big Red sponge or Aqua sponge or equivalent?

Sent from my SM-G950U using Tapatalk
 
b2b841f5800e482a666abedf9d22ce95.jpg
be62bc45564cf0f7e74ba08f8baad23a.jpg



Sent from my iPad using Tapatalk
As it should be, my situation is exactly the same but my wife already went out in it and we've gotta head out in a bit to pick up our daughter from Grandma and Grandpa's house, an hour drive! I guess I'll get to see what the AWD system and torque vectoring is all about

Sent from my SM-G950U using Tapatalk
 
As it should be, my situation is exactly the same but my wife already went out in it and we've gotta head out in a bit to pick up our daughter from Grandma and Grandpa's house, an hour drive! I guess I'll get to see what the AWD system and torque vectoring is all about
Her Beast was to be washed last night but...;)

As soon as the snow stops I’ll pull it in the heated garage and give it a quick bath. Supposed to be nice until Thursday so we’ll both be styling in our clean rides for a good part of the week.
 
Well apart of this pic is from inside our ride but check out what's next to us at the light during a freak snow fall here in Chicagoland, LOL
72b71162cf81fedfabaa9abc20ef53e6.jpg


Sent from my SM-G950U using Tapatalk
 
Well apart of this pic is from inside our ride but check out what's next to us at the light during a freak snow fall here in Chicagoland, LOL
72b71162cf81fedfabaa9abc20ef53e6.jpg


Sent from my SM-G950U using Tapatalk
It's AWD too! Perfect car for this weather.

Sent from my SAMSUNG-SM-G930A using Tapatalk
 
Back
Top