Mike Phillips
Active member
- Dec 5, 2022
- 51,004
- 7
The Robert DiTerlizzi Method
This is a technique my buddy Robert shared with me and I like it so much I show it at all my classes and always give him due credit as I don't steal other guys stuff.
After you've done all the hard work the last thing you want to do is to put any swirls or scratches back into the paint. Now I wash all the microfiber towels we use here at the garage myself and I'm very meticulous and careful about the entire washing and drying process because the last thing I want to have happen is for Max to come out here to get a few microfiber towels to work on his cars and have some kind of contaminant in the towel.
That said, before using any microfiber towel it's important to inspect it two ways.
Visually Inspect
First look closely at the towel, especially if the towel has a plush nap and inspect for any type of foreign contaminant that might be lodged in the nap. If discovered either remove the contaminant or get a different towel.
Tactically Inspect
Second, take your clean hand and run it over the face of the towel on both sides. Often times your sense of touch will detect foreign particles or contaminants that your eyes cannot see. If discovered, remove the contaminant or get a different towel.
Do this for each towel. It only takes a few seconds to inspect your towels and it can save you a lot of heartache.
RDM = the Robert DiTerlizzi Method
Thanks Robert and for everyone reading this into the future, if you're not inspecting your microfiber towels by feeling EACH ONE before you wipe down something you've been buffing out all day long then start!
Due credit where credit is due...
:dblthumb2:
This is a technique my buddy Robert shared with me and I like it so much I show it at all my classes and always give him due credit as I don't steal other guys stuff.
After you've done all the hard work the last thing you want to do is to put any swirls or scratches back into the paint. Now I wash all the microfiber towels we use here at the garage myself and I'm very meticulous and careful about the entire washing and drying process because the last thing I want to have happen is for Max to come out here to get a few microfiber towels to work on his cars and have some kind of contaminant in the towel.
That said, before using any microfiber towel it's important to inspect it two ways.
Visually Inspect
First look closely at the towel, especially if the towel has a plush nap and inspect for any type of foreign contaminant that might be lodged in the nap. If discovered either remove the contaminant or get a different towel.
Tactically Inspect
Second, take your clean hand and run it over the face of the towel on both sides. Often times your sense of touch will detect foreign particles or contaminants that your eyes cannot see. If discovered, remove the contaminant or get a different towel.
Do this for each towel. It only takes a few seconds to inspect your towels and it can save you a lot of heartache.
RDM = the Robert DiTerlizzi Method
Thanks Robert and for everyone reading this into the future, if you're not inspecting your microfiber towels by feeling EACH ONE before you wipe down something you've been buffing out all day long then start!
Due credit where credit is due...
:dblthumb2:
rops:
