tiny spots on my hood

J

jwollam

New member
Joined
Sep 14, 2013
Messages
101
Reaction score
0
Hi everyone!
I've been lurking around for a few weeks, and learning a ton from you folks!
A few weeks ago I decided to detail my 2002 Hyundai Santa Fe (the wife's daily driver).
I noticed after going with the M105/M205 combo I have these small spots on most of the car (most noticable on the hood). Just wondering what they are? I can't say for sure they were or were not there when I started as I really didn't take that close of a look.
I used a PC7424XP, and chemical guys hexlogic orange and white pads.
Could this be the clear coat failing? (228k on the clock, and 12 years old)




65343
 
Kinda hard to see the spots... But could be the start of the clear delaminating ?.
 
I've seen bird crap etch paint and leave spots exactly like that before.


Edit to clarify my statement: I worked on a white car recently that gets bird crap on it all the time and the owner neglects it. After polishing, there were spots remaining similar to what your picture shows and those spots were only present where bird crap was sitting for a long time.
 
lyodbraun said:
Kinda hard to see the spots... But could be the start of the clear delaminating ?.
Click to expand...

My apologies, best pics I could get at the time.
The spots are what appear to be "flakes" in the paint giving off almost a glitter reflection.
They can be well seen around the area of the light bulb reflecting in the paint. I'm hoping to pick up a brinkmann xenon light soon, haven't been too impressed with the reviews on the LED version.

Thanks for the reply! :)
 
For now you can try your cell phone light. I used my iPhone light and it worked well. Not sure which phone you have available?
 
It looks like solvent pop, but I'm gonna say really small pits, or chips. I've seen lots of cars from sandy areas that look like this.

My wife recently went to Panama city, and noticed this same defect when she came back 8 weeks later.

Sent from my SAMSUNG-SGH-I777 using AG Online
 
hernandez.art13 said:
For now you can try your cell phone light. I used my iPhone light and it worked well. Not sure which phone you have available?
Click to expand...
Tried my cell phone light (droid X2) tried my 5th gen ipod touch, and tried one of my tactical LED flashlights, unfortunately none of them really helped with making the defects any brighter or more apparent. I'll break out my regular camera tomorrow and try taking some pictures when I get home from work (hopefully in sunlight).
 
hernandez.art13 said:
Has the car been repainted?
Click to expand...
Not to my knowledge, we purchased it about three years ago, had it professionally detailed a week after we bought it, and then it was ran through a car wash most of it's time we've had it. I've since realized the error my ways and switched to the two bucket method with grit guards and two separate wash mits for the top and bottom half of the car.

I also noticed a few of these in my motorcycle's finish while I was outside (I gave it the same process a few weeks after doing the wifes car). I know for certain these were not there before I did the work on it. Could it be something I did with the PC7424XP?
 
You can try street lights or lights in a gas station

A lot of things are possible, but a PC is hard to damage with

And also from my understanding, solvent pop happens when a car is repainted
 
You must log in or register to reply here.
Back
Top