Tire scuff mark on clear bra..

[BigBrad]

I just had an estate management lady for over on Sea Island call me, they were taking the homeowners Bentley to get it serviced and on the way back ran over a tire she I guess. She said the rubber from the tire has left "rubber scuff marks on the clear bra".
Can those clear bra's be buffed? I have not had to deal with o e of these yet..

 

[wgilles]

Yes you can. I had a couple scuffs on my clear bra and used M205 on my PC 7424XP...took them out and didn't damage the bra.

If you get any product on the seams, just spray them with some clay lube or instant detailer and it comes right out.

 

[FUNX650]

I just had an estate management lady for over on Sea Island call me, they were taking the homeowners Bentley to get it serviced and on the way back ran over a tire she I guess. She said the rubber from the tire has left "rubber scuff marks on the clear bra".
Can those clear bra's be buffed? I have not had to deal with o e of these yet..

Before 'buffing' this PPF, I suggest trying one of these products to: "clean the scuffs":



And...even though PPF's polyurethane differs somewhat from that of CC automotive paint...




And/or call: XPEL Technologies Corp.


Quote:
"The best solution is going to be to use 3M Perfect -It part# 06064 Machine Polish, with the coordinating buffing pad part# 05738. #Use a an Orbital buffer at the lowest speed and then gradually progress up as needed. #This must be done very carefully so that you don't burn through the film. #I usually hit the area a few times for about 15-30 seconds each time".





Bob

 

[BigBrad]

Thanks guys!! I'll let ya know how it goes!

 

[BigBrad]

Some 105 and a yellow pad took it right off!!