to the M100 users...

Lambo1

Lambo1

New member
Joined
Nov 19, 2008
Messages
36
Reaction score
0
just curious what u guys follow with after M100 when doing a 2 step (cut and polish)
 
205, maybe Reflect, maybe Sonax PF, but usually 205.
 
205, hyper polish, or reflect. Depends on the paint though.

Sent from my N9810 using AG Online
 
With the right technique, M100 can finish off incredibly well on soft to medium paints.

I use the new style Meguiars MF Finishing discs with M100 and I can finish down with almost no micro-marring and just the slightest bit of haze.

The key is to blow out the pad after each section, keep speeds low (3-3.5), and maintain a moderate arm speed and minimal pressure.
 
The Critic said:
With the right technique, M100 can finish off incredibly well on soft to medium paints.

I use the new style Meguiars MF Finishing discs with M100 and I can finish down with almost no micro-marring and just the slightest bit of haze.

The key is to blow out the pad after each section, keep speeds low (3-3.5), and maintain a moderate arm speed and minimal pressure.
Click to expand...

No lie. It finishes incredibly well with MF finishing discs as long as you manage paint residue and spent product with frequent pad cleaning.

Sent from my N9810 using AG Online
 
Depending on the test spot. M100 can finish very well. I like to keep a lot of different polishes at hand. M205, CarPro Reflect, Ameridepth, HD Polish, etc. M205 and Reflect are my go to polishes though.
 
'God' Bless OP from this thread, and thanks to all friends who answered, I have M100 and MF discs and I'll try this Finishing Disc approach like suggested here on the Rupes, maybe tomorrow.

I also own some M205 in case I need to improve something after, again, thanks a bunch (y)

That's start the week on the right step!

Kind Regards.
 
You must log in or register to reply here.
Back
Top