Tool, Pad & Product Suggestions Wanted

lewis1585

lewis1585

New member
Joined
Sep 27, 2012
Messages
21
Reaction score
0
Hello, my name is Michael Lewis.
I have spent hours and hours looking at this site, and to be honest I just do not know where to start.

My wife is asking what I would like for my birthday and Christmas

We have
2012 Nissan Armada that is Lakeshore Slate
2013 Acura RDX that is White Diamond Pearl

I would like recommendations on products for my two cars. I would prefer to use the same products on both vehicles.

Clay, sealants, waxes, DA polishers and the appropriate accessories.

I have attached pictures of the vehicles

If I am missing anything please let me know.

Thank you in advanced for your time:xyxthumbs:Feed back please
Michael Lewis
 
Last edited:
Just a reminder, even though most folks here are top notch good citizens, never wise to openly post your phone number like that on the internet! :)
 
How long do you plan on keeping the vehicles?? Do you notice and scratches or swirls on either one yet?? Looking at the pictures the paint looks pretty clean...but from a distance it's hard to tell...
 
DaveT435 said:
How long do you plan on keeping the vehicles?? Do you notice and scratches or swirls on either one yet?? Looking at the pictures the paint looks pretty clean...but from a distance it's hard to tell...
Click to expand...

Dave, The Acura is on lease, so 3 years. We will keep the Armada till it dies.

The Acura only has 1500 miles and the paint is as good as can be expecetd from the dealer.

The Armada has 20,000 miles and it has some small scratches, swirls, and nicks.
 
Mike's video's are the best place to start...Machines, pads, and product...well everyone has their opinion. I like the Optimum line.
 
I would pick up a Griot's Garage polisher, and the lake country ccs pads that are on sale here to start. I have 2orange, 2white, 1green, and 1red from my last purchase here. Griot's Garage 6 inch Random Orbital Polisher, Dual action buffer, DA polisher

Then grab pretty much any compound and polish, Meguiars m105 and m205 are excellent products I have used. They are pretty simple to use, and not very expensive.

Then pretty much any wax will work. I like Meguiars ultimate liquid wax for ease of use and pricing.
 
Thanks for your help guys.

What is your opinion on Collinite 845?Feed back please
 
Hi Michael,

Good to see that you started a "dedicated thread" with a title that will get you more help than,

Hello from Indianapolis Indiana


:dblthumb2:


The Griot's DA Polisher is a very powerful DA Polisher, a few years ago I called it a safe version of a rotary buffer because for the most part you cannot get the pad to stop rotating and that's the difference between a DA Polisher that uses a Free Floating Spindle Bearing Assembly and a Direct Gear Driven Rotary Buffer.

Point being, it has a lot of power but it's still very safe even for a beginner.

It also has more than enough power to rotate 6.5" pads of any design under pressure. The more you read on this forum the more you'll come to understand what this topic is all about.


Because your "new" cars have a lot of thin panels, that is section of paint between either body lines or body seams, having some 4" pads and a 3.5" backing plate is something to consider adding to your collection at least at some point.

See here...

1994 Porsche Detailed for "Operation Comfort" Modeled by Brittany from Stuart, Florida


This is a 4" pad and you can see how it's fitting between the taped-off rubber windshield gasket and the seam between the hood on this Porsche...



Wolfgang Total Swirl Remover
1994BlackPorscheOC023.jpg




Just something to consider down the road...


Also, the Wolfgang Twins are very good at removing swirls and maximizing gloss and clarity while perfectly preparing your paint for a wax, paint sealant or coating as you can see by these results...


Yancylighting007.jpg




And keep in mind I have a lot of articles on all aspects of using a DA Polisher, most are under the DA Polisher Section but there's tucked away all over the place on my article list, it's really worth a scan....


Articles by Mike Phillips


And my how-to book is the ONLY book on the market focused specifically on DA Polishers as well as ALL aspects of prepping and then maintaining your car's finish after the DA Steps.


Paperback




:)
 
Mike.Phillips@Autogeek said:
Hi Michael,

Good to see that you started a "dedicated thread" with a title that will get you more help than,

Hello from Indianapolis Indiana


:dblthumb2:


The Griot's DA Polisher is a very powerful DA Polisher, a few years ago I called it a safe version of a rotary buffer because for the most part you cannot get the pad to stop rotating and that's the difference between a DA Polisher that uses a Free Floating Spindle Bearing Assembly and a Direct Gear Driven Rotary Buffer.

Point being, it has a lot of power but it's still very safe even for a beginner.

It also has more than enough power to rotate 6.5" pads of any design under pressure. The more you read on this forum the more you'll come to understand what this topic is all about.


Because your "new" cars have a lot of thin panels, that is section of paint between either body lines or body seams, having some 4" pads and a 3.5" backing plate is something to consider adding to your collection at least at some point.

See here...

1994 Porsche Detailed for "Operation Comfort" Modeled by Brittany from Stuart, Florida


This is a 4" pad and you can see how it's fitting between the taped-off rubber windshield gasket and the seam between the hood on this Porsche...



Wolfgang Total Swirl Remover
1994BlackPorscheOC023.jpg




Just something to consider down the road...


Also, the Wolfgang Twins are very good at removing swirls and maximizing gloss and clarity while perfectly preparing your paint for a wax, paint sealant or coating as you can see by these results...


Yancylighting007.jpg




And keep in mind I have a lot of articles on all aspects of using a DA Polisher, most are under the DA Polisher Section but there's tucked away all over the place on my article list, it's really worth a scan....


Articles by Mike Phillips


And my how-to book is the ONLY book on the market focused specifically on DA Polishers as well as ALL aspects of prepping and then maintaining your car's finish after the DA Steps.


Paperback




:)
Click to expand...
Mike, Thanks again for all of your help, I really appreciate it.
:dblthumb2:
 
ken tuep said:
I would pick up a Griot's Garage polisher, and the lake country ccs pads that are on sale here to start. I have 2orange, 2white, 1green, and 1red from my last purchase here. Griot's Garage 6 inch Random Orbital Polisher, Dual action buffer, DA polisher

Then grab pretty much any compound and polish, Meguiars m105 and m205 are excellent products I have used. They are pretty simple to use, and not very expensive.

Then pretty much any wax will work. I like Meguiars ultimate liquid wax for ease of use and pricing.
Click to expand...

Ken,
on the Griot's DA polisher. Would you wait for the Gen 3 to come out?
 
I recommend waiting if you don't mind spending a bit more.($20+ pads) I was recommending now because of the awesome sale. I wish I had waited another 3 weeks to purchase mine.

I have the current model that I just recently bought, and I don't care for the speed dial location. It's kind of awkward to change on the fly. All of my other machines are easy to dial in the speed I want at any given time. But the machine is a beast compared to my dewalt 443, and pc 7424. It's almost unstoppable, as far as pad rotation is concerned.

Having said all that, I'd buy now to get the pads for free, and take advantage of the free shipping also. I could live with a goofy dial position if it saved me almost $90!!
 
You must log in or register to reply here.
Back
Top