Torq Foam Cannon question

Jeremy1976

Jeremy1976

New member
Joined
Apr 13, 2015
Messages
978
Reaction score
0
I just got a new foam cannon (Torq brand) from CG. Came with 1 gallon of snow foam. I'm using a gas pressure washer, 3200psi, 2.5 gpm. I am not getting thick foam. Mixed a good 2 ounces of soap with warm water, 2nd time added more with even warmer water. Mixed it up well, adjusted the air mixture both ways and the foam seemed about the same as my foam gun that I use with the garden hose. My expectations from the videos I watched were that the foam would be much much thicker. Any suggestions?

Thanks in advance.
 
Jeremy1976 said:
I just got a new foam cannon (Torq brand) from CG. Came with 1 gallon of snow foam. I'm using a gas pressure washer, 3200psi, 2.5 gpm. I am not getting thick foam. Mixed a good 2 ounces of soap with warm water, 2nd time added more with even warmer water. Mixed it up well, adjusted the air mixture both ways and the foam seemed about the same as my foam gun that I use with the garden hose. My expectations from the videos I watched were that the foam would be much much thicker. Any suggestions?

Thanks in advance.
Click to expand...

Doesn't surprise me. As you continue to use CG products you will continue to be disappointed. The Torq foam cannon is not sold by AutoGeek so they are not to be discussed on this forum You will need to contact CG - good luck with that.
 
Couple things to think about.

You have plenty of power for a foam canon, so certainly not your pressure washer that's the problem. I always connect the cannon directly to my wand and omit the metal extension.

In my experience, optimal foam production will be at the widest spray setting and the solution valve wide open.

Do you have very hard water? This can substantially affect foaming. An inline softener can help a lot. AG has them.

Were you using honeydew snow foam? Not my personal favorite for foam production. Citrus wash+gloss is way better IMO.
 
Audios S6 said:
Couple things to think about.

You have plenty of power for a foam canon, so certainly not your pressure washer that's the problem. I always connect the cannon directly to my wand and omit the metal extension.

In my experience, optimal foam production will be at the widest spray setting and the solution valve wide open.

Do you have very hard water? This can substantially affect foaming. An inline softener can help a lot. AG has them.

Were you using honeydew snow foam? Not my personal favorite for foam production. Citrus wash+gloss is way better IMO.
Click to expand...


Yes I was using the Honeydew. I have Citrus and V07. I'll give those both a try. I am using the extension but they are in the video as well. The foam is milky and runny and just dissipates from the panels quickly. In the videos that I have watched its thick like shaving creme or whipped cream. I would say the foam is similar to my foam gun using a regular garden hose. Thanks for your reply.
 
There is a metal screen inside the unit. May want to remove it and clean it, perhaps it got fouled before you received the unit. There is a video on here about removal.

Remove the pin in the black plastic nozzle, remove the nozzle, unscrew the fitting under the nozzle (will require
Wrenches). The screen lives there.
 
Received an email from CG with an address to send the cannon back to. Sent back last week. They should have it Monday. I will see what they will do for me. I am in the process of switching over to AG as my CG products run out.

Thanks
 
Jeremy1976 said:
Received an email from CG with an address to send the cannon back to. Sent back last week. They should have it Monday. I will see what they will do for me. I am in the process of switching over to AG as my CG products run out.

Thanks
Click to expand...

I, too bought into the CG hype a while ago...mainly because I have a friend who swears by their products. Thankfully, my supply of Diablo Wheel cleaner is running out, and will not be replaced. It wasn't terrible, but not any better than anything you can buy at WalMart. Bought a bottle of Mr Pink, which will not be replaced either...Meguiars Gold Class is simply better. Their Butter Wet Wax is okay, but once that is used up, will not be replaced.

Good luck with CG customer service....not always the best.....
 
So an update on the foam cannon situation for anyone that cares. They sent me an email finally after I called and left a voicemail, and sent 3 emails. The email was real vague. Just gave me the address to send it back to. So I sent it out Wednesday May 18th and then once I had the Fedex tracking I sent that information to the guy I was in contact with via email. To make a long story short I have not heard anything since then and I sent another 3 emails once I got confirmation it was received by them through tracking info. I told them I just wanted to be credited so I can get some new pads for my new Flex I got through AG and then I will cut my loses. Haven't heard a thing.

Any idiot/business can sell something. To be a good professional business it takes great customer service to back up your products and take care of the customers. To me customer service is everything. I shouldn't have to chase a company around to find out what the status is. These people should be checking there emails at a minimum daily and getting back to their customers with the information they ask for.

I am glad I found this place. And from the sounds of it, the customer service is decent.

So long Chemical Guys.

Hope you all have a nice weekend!
 
With all do respect to all the CG negative comments, Honey Dew Snow Foam imo is one of the best foaming soaps on the market. I use it in a foam gun and it foams like crazy, way more foam than Citrus Wash and Gloss and I have gallons jugs of both of those products.
 
custmsprty said:
With all do respect to all the CG negative comments, Honey Dew Snow Foam imo is one of the best foaming soaps on the market. I use it in a foam gun and it foams like crazy, way more foam than Citrus Wash and Gloss and I have gallons jugs of both of those products.
Click to expand...

I have a gallon of the Honeydew as well and love it! Works good in my foam gun and the smell is nice too!
 
custmsprty said:
With all do respect to all the CG negative comments, Honey Dew Snow Foam imo is one of the best foaming soaps on the market. I use it in a foam gun and it foams like crazy, way more foam than Citrus Wash and Gloss and I have gallons jugs of both of those products.
Click to expand...

I own in gallon form, pretty much all their soaps and it's a tough call between citrus wash and honeydew. I can get both to foam incredibly well. Hell I can get Mr. Pink to foam like crazy too. All their soaps are fantastic. I know CGs products are not well liked here but some of their stuff is very very good. Some stuff not so much.
 
Jeremy1976 said:
I have a gallon of the Honeydew as well and love it! Works good in my foam gun and the smell is nice too!
Click to expand...

Honeydew in my MTM foam cannon always reminds me of summer. The smell the crazy foam, I don't use it in a bucket but it's one of the best auto foaming shampoos you can buy, and I pretty much put everything through my gun at least once.
 
I don't like chemical guys as well mostly because there are so much better choices for same price or even cheaper.

But there are two things I use from CG

Soaps and air freshener xD
 
You must log in or register to reply here.
Back
Top