This vehicle belongs to a family friend who just wanted it cleaned up a bit. The car had just over 100k and they wanted to put on some protection for the winter. I don’t think this car had ever been detailed prior, but they occasionally wash and vacuumed it.
Before:
Iron removal with 3D BDX:
After:
Products used
I did have some trouble with the seats. I couldn’t completely saturate the seats and the material gave me some trouble when I tried to spot treat the stains. Not over excited with the results, but it was the best I could achieve with the tools and time that was available. Any suggestions or tips for detailing with difficult cloth seats?
Before:
Iron removal with 3D BDX:
After:
Products used
- 3D BDX on a dry car followed by a rinse and wash
- Chemical Guys Mr. Pink
- McKees N-914 at Clay lube/Waterless dilution
- Mother clay 2.0 (I like this better the more I use it)
- Collinite 845
- Meguiar’s Wheel Brightener
- Meguiar’s Super degreaser
- Meguiar’s APC
- Meguiar’s Glass Cleaner
- Meguiar’s Hyper Dressing 2:1 for wheel (two coats), 4:1 for wheel wells and other plastics
I did have some trouble with the seats. I couldn’t completely saturate the seats and the material gave me some trouble when I tried to spot treat the stains. Not over excited with the results, but it was the best I could achieve with the tools and time that was available. Any suggestions or tips for detailing with difficult cloth seats?
Nice work!