URGENT BUYING ADVICE NEEDED! GTechniq or CQuartz

I agree with everyone regarding the prep. Listen, I know if I don't polish it out correctly then it won't do the coating any favors.

I just wanted to get the forum's opinion on which coating gives the best shine.

I end up buffing the car every so often anyways because of the inevitable swirls that show up, even with proper washing. Unfortunately it happens when you drive a car and take it to the track hard.

I don't really care that Opti-Coat 2.0 will last me 5 years and GTechniq with last 2 years. I will buff them off and reapply within a year.
 
Radarryan said:
I agree with everyone regarding the prep. Listen, I know if I don't polish it out correctly then it won't do the coating any favors.

I just wanted to get the forum's opinion on which coating gives the best shine.

I end up buffing the car every so often anyways because of the inevitable swirls that show up, even with proper washing. Unfortunately it happens when you drive a car and take it to the track hard.

I don't really care that Opti-Coat 2.0 will last me 5 years and GTechniq with last 2 years. I will buff them off and reapply within a year.
Click to expand...

GTechniq C1 has been on my minivan for 3 years and it acts like its new.
 
Radarryan said:
Was the application pretty difficult? I hear some horror stories about it hazing and then reappearing later.
Click to expand...

Its very easy to do. Never heard of it hazing. Make sure the surface is clean, wipe on C1, wipe of residue right away (make sure you check at different angles to make sure its all gone), wait for it to cure. DONE
 
You must log in or register to reply here.
Back
Top