Waking up the Pony (Spring bath)

DARK HORSE

Active member
Joined
Sep 14, 2009
Messages
2,537
Reaction score
0
Hi guys, it's been a long winter and my "09" Pony's been hibernating all winter in the garage... Well I woke her up this past weekend and gave her her spring bath :) (OH YA!). Any way I thought I would share some pictures. Sorry no befores (Iknow , I know) but I never really let her get dirty or in need of any serious correction and I did a complete detail and polishing just before I put her to bed for the winter. Products used: CR spotless, Pinnacle XMT shampoo and conditioner soap, Dodo juices Wooky, Dried with leaf blower, Fk-425, and PakShak WW's, PCXP with various LC pads, m105/m205, Stoners glass cleaner, 303 protectant, P21S wheel gel, PB world wheel sealant, Optimum metal polish, Mothers powerball, Pinnacle Souveran paste wax, Pinnacle leather cleaner and conditioner, DP interior cleaner.
Here we go:
During the bath...
IMG_0430.jpg

IMG_0439.jpg

IMG_0442.jpg

(Deionized water sitting a top two layers Souveran)
IMG_0436.jpg

IMG_0641.jpg

IMG_0643.jpg

Some sun shots
IMG_0591.jpg

IMG_0668.jpg

IMG_0656.jpg

IMG_0634.jpg

IMG_0666.jpg

IMG_01872.jpg



Some Reflection and Miscellaneous shots

IMG_01941.jpg

IMG_0662.jpg

IMG_0661.jpg

IMG_0622.jpg

IMG_0619.jpg


IMG_02541.jpg



IMG_0630.jpg

IMG_0602.jpg

IMG_0658.jpg

IMG_0622.jpg


Thanks for looking...
 
Nice work Tad! Thanks for all the pictures! She's a looker :props: :drool:

How did you end up liking the 303? Is it for you?

Also, do you do anything special for your chrome?
 
Nice work Tad! Thanks for all the pictures! She's a looker :props: :drool:

How did you end up liking the 303? Is it for you?

Also, do you do anything special for your chrome?

Thanks Corey, I appreciate it. I liked the 303, but did not use it on the clear plastics. (used DP Plexall for clear) forgot to mention that. I used Optimum metal polish and Mothers power ball on all chrome. I used Optimum metal polish and 0000 steel wool on the stainless exhaust tips.
 
I've got some of that Optimum MP in my cart on your recomendation. Was planning to use it on my SS exhaust tips as well. Didn't know I could use it for the chrome too. Sounds great! Can't wait!
 
Looks great Tad ,Better put her back into the grage before it starts to snow again
 
Products used: CR spotless...Dried with leaf blower, Fk-425, and PakShak WW's
I knew you wouldn't be able to let the water sit. :D
So are you going to try it? See if you get any spots? My money is on you are too D.O... and you will end up drying it (at least partly) :D

The 'stang looks good Tad. I can't wait for the full swing of detailing weather here.

DLB
 
Looks great. Nice Mustang. Been itching to get my pony out. We have had a couple nice days in Indiana, but, the roads are still covered in sand, salt and potholes. It is spotless clean under the cover so no sense in washing it either. We are supposed to get some rain this week. Hopefully it will clean the roads off and I will be able to fire her up within the week.
 
Do you see much of a pressure drop across that CR? I have been thinking about getting one, but, I don't have real good water pressure.
 
Man, that looks great! I was thinking about the CR Spotless too, but I'll wait for your review first! BTW, when did you change your SN?
 
Oh my she is Pinnacle beautiful!!! I love the engine shots too, wish you were closer cuz I somehow think a ride in that Mustang might be real fun!!! :cruisin:
 
I knew you wouldn't be able to let the water sit. :D
So are you going to try it? See if you get any spots? My money is on you are too D.O... and you will end up drying it (at least partly) :D

The 'stang looks good Tad. I can't wait for the full swing of detailing weather here.

DLB

:laughing:
When I hooked my hose up inside my garage so my car washes would start utilizing the water filter I thought I would let it sit and check it out. I haven't had the nerve as of yet.
 
I've got some of that Optimum MP in my cart on your recomendation. Was planning to use it on my SS exhaust tips as well. Didn't know I could use it for the chrome too. Sounds great! Can't wait!
Ya it works great Corey, I think you'll like it (and it kinda has a slight cherry smell) way better than that old school harsh smelling polish!

Looks great Tad ,Better put her back into the grage before it starts to snow again
Don't say that Adam :nomore: But seriously thanks for the kind words my friend.

I knew you wouldn't be able to let the water sit. :D
So are you going to try it? See if you get any spots? My money is on you are too D.O... and you will end up drying it (at least partly) :D

The 'stang looks good Tad. I can't wait for the full swing of detailing weather here.

DLB

Thanks Dalton, appreciate it...You are right about just letting it sit, I tried but just couldn't do it fully. I did however let alot of it dry on it's own. I used the leaf blower to blow out the crevices and some of the water off. I let it sit for quite awhile and then went at it w/Fk-425. It definitely made a BIG difference in the way I usually dry. I was a lot more casual and the parts that fully dried on there own had NO water spotting. I definitely love the CR and next time I wash the Dodge I am going to wash it and totaly walk away for a few hours. I'll post a review then, but preliminary testing looks GREAT:props:

Looks great. Nice Mustang. Been itching to get my pony out. We have had a couple nice days in Indiana, but, the roads are still covered in sand, salt and potholes. It is spotless clean under the cover so no sense in washing it either. We are supposed to get some rain this week. Hopefully it will clean the roads off and I will be able to fire her up within the week.

Thank you! I here ya about the itch man :D

Do you see much of a pressure drop across that CR? I have been thinking about getting one, but, I don't have real good water pressure.

Definitely some, but not what I would say is to much. The nozzle that comes with it reduces the flow to I think around 2 GPM, but is designed to not affect the pressure to much. More than enough pressure to do the job. As far as input pressure they recommend no more than 75 psi anyway.

Man, that looks great! I was thinking about the CR Spotless too, but I'll wait for your review first! BTW, when did you change your SN?

Thanks Richard, appreciate the kind words my friend. As far as the CR goes, Intital testing looks GREAT, I am thinking I am going to love it!!! After I play around with it some more I'll post the results in a review. (Unfortunetly it just started snowing again) THANKS ADAM :bat:

Oh my she is Pinnacle beautiful!!! I love the engine shots too, wish you were closer cuz I somehow think a ride in that Mustang might be real fun!!! :cruisin:
Thank you for the sweet words Meghan...You keep treating me so well and I am apt to make the 2 day drive down just to take you crusing ;)

:laughing:
When I hooked my hose up inside my garage so my car washes would start utilizing the water filter I thought I would let it sit and check it out. I haven't had the nerve as of yet.

I hear ya my brother, I hear ya lol...
 
Last edited:
Back
Top