Wax or sealant you can apply to the entire car before removing???

Collinite 845, I've done 4 or 5 full applications and used about a quarter of the bottle, because this one you apply very sparingly. Applied to the whole vehicle, in my case an FJ cruiser, leave it for an hour or so, and buff off, buffs off so easily. Also has very good self cleaning abilities, when it gets rained on, it removes whatever dust and dirt is on the surface.
a1a7fccd9053082fd66a4bd1bf0a1e95.jpg


Sent from my motorola edge 20 fusion using Tapatalk
 
Well, the ultimate for that is a WOWA sealant, like Opti-Seal, Zaino Clear Seal, Wolfgang Deep Gloss Liquid Seal, or Ultima Paint Guard Plus.
 
3d poxy.

Sent from my SM-S901U using Tapatalk
 
Gyeon Q2 Wax is made to not only be applied to the entire car but once you so it needs to sit there for 30 minutes minimum

Btw this IS an outstanding wax

Sent from my SM-G991U using Tapatalk
 
Gyeon Q2 Wax is made to not only be applied to the entire car but once you so it needs to sit there for 30 minutes minimum

Btw this IS an outstanding wax

Sent from my SM-G991U using Tapatalk

I saw your thread awhile back when you applied it. I got some because of it. I also picked up Jescar Ultralock Plus. Can't wait to try both on various cars.
 
I saw your thread awhile back when you applied it. I got some because of it. I also picked up Jescar Ultralock Plus. Can't wait to try both on various cars.
Why haven't you used Q2 yet?

Sent from my SM-G991U using Tapatalk
 
Just got it a few days ago. Weather has been terrible. I want to try it on my silver Accord.

Sent from my SM-G950U1 using Tapatalk
 
Just got it a few days ago. Weather has been terrible. I want to try it on my silver Accord.

Sent from my SM-G950U1 using Tapatalk
Oh sorry, sounded like you had it for a while. Like any other wax, apply it thin and it's ok if it sits longer than 30 mins, hopefully the humidity isn't an issue for you like it is us currently

Sent from my SM-G991U using Tapatalk
 
Haven't used Jescar Ultra Lock Plus yet but the Power Lock Plus would also be an option.
 
Oh sorry, sounded like you had it for a while. Like any other wax, apply it thin and it's ok if it sits longer than 30 mins, hopefully the humidity isn't an issue for you like it is us currently

Sent from my SM-G991U using Tapatalk

Absolutely. I plan on applying with my DA on a black pad.
 
^^^^^^^^^THIS^^^^^^^^^^^^^^^^^^^^^^
I can say with confidence that it goes on easy, comes off as easy, and lasts a solid 6 months through winter with few washes. Super tough stuff.

Sent from my SM-S911U using Tapatalk
 
Every wax/sealant I've ever used needed some sort of cure time of at least 30-minutes to an hour before buffing, so the entire vehicle is covered before removal starts.

My current favorite sealant right now is Wolfgang's SiO2 Paint Sealant. Great product.
 
I can say with confidence that it goes on easy, comes off as easy, and lasts a solid 6 months through winter with few washes. Super tough stuff.

Sent from my SM-S911U using Tapatalk

Ultra Lock Plus also gives outstanding gloss and slickness....you will not be disappointed.
 
Duragloss 111 (sealant)
Meguiar's M21 2.0
Meguiar's M26

I've used these a lot over the years.
 
Duragloss 111 (sealant)
Meguiar's M21 2.0
Meguiar's M26

I've used these a lot over the years.
Yeah DG#111 w/#601 PBA was my go to when I got here and settled in, all the DG products were great, I still have and recently used Aqua Wax, a product that has more POP 30 minutes later

Sent from my SM-G991U using Tapatalk
 
I'm going to add:

-Gyeon G2 Wax

-TW graphene + ceramic wax

-Last but certainly not least:

KLASSE SEALANT GLAZE (KSG)
I will pass along my proven, easy to use method of application of this 50 YR OLD product (or has Klasse itself been around that long)

***EDIT***

Forgot the title and you CAN NOT apply to the entire vehicle and then remove...but KAIO could be done like that

Sent from my SM-G991U using Tapatalk
 
Back
Top