This car took a while to get done and as many detailers know, using a PC7424XP takes a while to get a good correction done. The pictures i took of the before and afters when the afters still had the swirls is after the first go over, I rarely took second pass pictures except for at the end, but i'll let the reflections speak for themselves. Thanks for looking 
What was done:
- Before pictures
- Wheels hit with Sonax full effect but didn't work out very well so i followed with a meguiars wheel brightener and adams APC mixture, 2oz each and that mixture was diluted 4:1 with water
- Tires treated with Adams APC and sonax tire gel
- Engine cleaned with adams apc and in n out spray
- exterior wash using lusso auto bathe + gilmour foam gun
- door jambs cleaned as well as hood and trunk jambs
- 303 aerospace on undercarriage
- clayed entire exterior including windows
- taped up
- paint measurement
- 3 step - m105 -> optimum poliseal -> menz powerlock
- inspection with 3m sungun
- rubber and vinyl cleaned
- exhaust tips cleaned
- windows clayed again and cleaned with prima clarity
Interior:
- vacuum
- trims treated with 303 aerospace and in n out spray
- interior glass cleaned
Products used:
Exterior wash:
- Lusso auto bath
- gilmour foamaster
- Grit guards
- Uber wool wash mitt
- Blue microfiber wash mitt
- Uber super drying microfiber towel
- 303 aerospace on undercarriage
- adams clay
Engine:
- Adams All purpose cleaner
- Adams In n out spray
Interior:
- In n out and 303 aerospace to clean the trims
- Prima clarity on windows and again over trims
Paint correction:
- Deflesko paint meter
- 3m sun gun
- Porter Cable PC 7424XP
- Uber green and blue 5.5 pads
- Surbuf pads 5.5
- Megs 105
- Optimum poliseal
- Menz PO106FA
- Menzerna powerlock
Wax:
- Sonax Nano Tech Wax
Now for the pictures
it was so sunny outside it was hard to foam the whole car without it drying, let alone getting around to it with the wash mitt
paint before
corrected
rocker panel before
somewhat 5050
after

What was done:
- Before pictures
- Wheels hit with Sonax full effect but didn't work out very well so i followed with a meguiars wheel brightener and adams APC mixture, 2oz each and that mixture was diluted 4:1 with water
- Tires treated with Adams APC and sonax tire gel
- Engine cleaned with adams apc and in n out spray
- exterior wash using lusso auto bathe + gilmour foam gun
- door jambs cleaned as well as hood and trunk jambs
- 303 aerospace on undercarriage
- clayed entire exterior including windows
- taped up
- paint measurement
- 3 step - m105 -> optimum poliseal -> menz powerlock
- inspection with 3m sungun
- rubber and vinyl cleaned
- exhaust tips cleaned
- windows clayed again and cleaned with prima clarity
Interior:
- vacuum
- trims treated with 303 aerospace and in n out spray
- interior glass cleaned
Products used:
Exterior wash:
- Lusso auto bath
- gilmour foamaster
- Grit guards
- Uber wool wash mitt
- Blue microfiber wash mitt
- Uber super drying microfiber towel
- 303 aerospace on undercarriage
- adams clay
Engine:
- Adams All purpose cleaner
- Adams In n out spray
Interior:
- In n out and 303 aerospace to clean the trims
- Prima clarity on windows and again over trims
Paint correction:
- Deflesko paint meter
- 3m sun gun
- Porter Cable PC 7424XP
- Uber green and blue 5.5 pads
- Surbuf pads 5.5
- Megs 105
- Optimum poliseal
- Menz PO106FA
- Menzerna powerlock
Wax:
- Sonax Nano Tech Wax
Now for the pictures


it was so sunny outside it was hard to foam the whole car without it drying, let alone getting around to it with the wash mitt





paint before






corrected













rocker panel before

somewhat 5050

after
