What did you do today, in regards to detailing?
- Thread starter Eldorado2k
- Start date
ZRX61
Member
- Aug 25, 2021
- 187
- 0
If the paint surface is pretty bad you will need something a little bit more aggressive
Sent from my SM-G991U using Tapatalk
I appear to have bought a lump of sticky blue plastic...
chilly
Well-known member
- May 13, 2006
- 3,110
- 992
Well that pretty much sums up a couple of brands of detailing clay…
The clay I have bought in the past that actually felt like modeling clay sucked
Sticky doesn’t begin to describe it
I like plasticky feeling clay
Sent from my iPhone using Tapatalk
NoClue
New member
- Oct 23, 2011
- 74
- 0
Todays routine. First wash in a week.
Wheels with Sonax Beast.
Foam gunned car with Mr. Pink. Followed by rinsing off and a second foaming for the wash.
One bucket with 8 MF mitts in Mr. pink and a little WG Uber rinsless for good measure.
Meguiar’s Gold Class Carnauba Wax Plus (2nd coat, did 1st coat last week).
WG Uber Rinsless mixed into a QD to go over any missed wax and possibly add a little pop???.
Zaino 9 leather cleaner.
Zaino 10 leather conditioner.
Griot's interior detailer.
Vacuumed.
Invisible Glass interior, exterior and moon sunroof.
Cooating of Meguiar’s Ultimate Quick Wax on the glass.
1 light coat of Carpro Perl on tires.
Overkill, yes according to the misses..........but great mental therapy for me!
Now let it rain...ugh.
Wheels with Sonax Beast.
Foam gunned car with Mr. Pink. Followed by rinsing off and a second foaming for the wash.
One bucket with 8 MF mitts in Mr. pink and a little WG Uber rinsless for good measure.
Meguiar’s Gold Class Carnauba Wax Plus (2nd coat, did 1st coat last week).
WG Uber Rinsless mixed into a QD to go over any missed wax and possibly add a little pop???.
Zaino 9 leather cleaner.
Zaino 10 leather conditioner.
Griot's interior detailer.
Vacuumed.
Invisible Glass interior, exterior and moon sunroof.
Cooating of Meguiar’s Ultimate Quick Wax on the glass.
1 light coat of Carpro Perl on tires.
Overkill, yes according to the misses..........but great mental therapy for me!
Now let it rain...ugh.
Klasse Act
Well-known member
- Feb 21, 2012
- 27,705
- 2,726
Hard core but that looks like a keeperAs long as I am going to have a rental truck, I am still going to treat it as my own. Today was a full two bucket wash and a final treatment of Sonax Spray and Seal. It lasts a good 2 months.
Sent from my iPhone using Tapatalk
Sent from my SM-G991U using Tapatalk
Klasse Act
Well-known member
- Feb 21, 2012
- 27,705
- 2,726
I have someone to help me out with my daughter incase I can't get her from daycare ontime, so today I took care of her car like I said I would, a way to pay her back. I will do this again come spring because I'll probably phone in a couple favors. Anywho I did an "enhanced carwash" and protection package. I started by using Eagle 1 plasti-dip/black wheel cleaner on the entire exterior paint (it had rail dust all over it, even the roof) She pointed this out to me previously and I told her I got something for that. Thankfully the car was white and it bled out pretty good.
I then turned to the tires/wheels. For the tires it was foaming Griot's Garage tire cleaner, they almost turned brown IMMEDIATELY!! I scrubbed them and then used Auto-Fanatic foaming wheel cleaner (medium strength) on the rims and all brushes were used and needed here. The one wheel had CC failure and I showed her this right away.
I followed this up with a good pre-wash using CarPro Lift, this way its extra clean. Next was a Gyeon Bathe 2BM wash for a completely squeaky clean paint surface, now it was time for the LSP.
I chose 303 Touchless Sealant for protection for ease of use and a good 2 monthes of protection, maybe 3 if it goes in the garage and it's maintained. It left the paint glossy and beading VERY well. I also sealed up the rims with it too.
To finish things up I added 2x's Feynlab Black Velvet Tire Coating and it actually finished out better on these tires than my own
Sent from my SM-G991U using Tapatalk
I then turned to the tires/wheels. For the tires it was foaming Griot's Garage tire cleaner, they almost turned brown IMMEDIATELY!! I scrubbed them and then used Auto-Fanatic foaming wheel cleaner (medium strength) on the rims and all brushes were used and needed here. The one wheel had CC failure and I showed her this right away.
I followed this up with a good pre-wash using CarPro Lift, this way its extra clean. Next was a Gyeon Bathe 2BM wash for a completely squeaky clean paint surface, now it was time for the LSP.
I chose 303 Touchless Sealant for protection for ease of use and a good 2 monthes of protection, maybe 3 if it goes in the garage and it's maintained. It left the paint glossy and beading VERY well. I also sealed up the rims with it too.
To finish things up I added 2x's Feynlab Black Velvet Tire Coating and it actually finished out better on these tires than my own
Sent from my SM-G991U using Tapatalk
Klasse Act
Well-known member
- Feb 21, 2012
- 27,705
- 2,726
So after I did that Camry it was time for the ES, it's been a messy, rainy week and it was DUE!
I started with an IGL Blizzard snow foam to loosen and break things down and let dwell and rinsed. Next were the tires and wheels, finished up that Auto-Fanatic foaming wheel cleaner I used earlier, all brushes used again! For the 2BM it was Gyeon Bathe and the ES began to look GLOWING once again
I then grabbed Dream Maker for a drying aid, let those beads sit this time and used my Big Blue drying towel to dry it to a stunning finish The mini Master Blaster dried up the tires/wheels where I applied a coat of Feynlab Black Velvet Tire Coating, let cure for a bit and then topped with Gyeon Tire for a truely great look
Now it's time to soak in the tub and wait for my girlfriend to come over...oh yeah, I have one of those now and her Cruze hatch is next tomorrow, stay "tuned"
Btw I pulled the ES up a bit for better pics and a new angle, surely noone wants to see the same old, same old
Sent from my SM-G991U using Tapatalk
I started with an IGL Blizzard snow foam to loosen and break things down and let dwell and rinsed. Next were the tires and wheels, finished up that Auto-Fanatic foaming wheel cleaner I used earlier, all brushes used again! For the 2BM it was Gyeon Bathe and the ES began to look GLOWING once again
I then grabbed Dream Maker for a drying aid, let those beads sit this time and used my Big Blue drying towel to dry it to a stunning finish
The mini Master Blaster dried up the tires/wheels where I applied a coat of Feynlab Black Velvet Tire Coating, let cure for a bit and then topped with Gyeon Tire for a truely great look
Now it's time to soak in the tub and wait for my girlfriend to come over...oh yeah, I have one of those now and her Cruze hatch is next tomorrow, stay "tuned"
Btw I pulled the ES up a bit for better pics and a new angle, surely noone wants to see the same old, same old
Sent from my SM-G991U using Tapatalk
Klasse Act
Well-known member
- Feb 21, 2012
- 27,705
- 2,726
Thank you and I really hope to be able to get a current gen Miata in a couple years because she'll love sitting up front ALL THE TIME
Sent from my SM-G991U using Tapatalk
So after I did that Camry it was time for the ES, it's been a messy, rainy week and it was DUE!
I started with an IGL Blizzard snow foam to loosen and break things down and let dwell and rinsed. Next were the tires and wheels, finished up that Auto-Fanatic foaming wheel cleaner I used earlier, all brushes used again! For the 2BM it was Gyeon Bathe and the ES began to look GLOWING once again
I then grabbed Dream Maker for a drying aid, let those beads sit this time and used my Big Blue drying towel to dry it to a stunning finish
Now it's time to soak in the tub and wait for my girlfriend to come over...oh yeah, I have one of those now and her Cruze hatch is next tomorrow, stay "tuned"
Btw I pulled the ES up a bit for better pics and a new angle, surely noone wants to see the same old, same old
Sent from my SM-G991U using Tapatalk
I absolutely love that blue!!
Sent from my iPhone using AGOnline
ZRX61
Member
- Aug 25, 2021
- 187
- 0
This is beyond sticky. It's now stuck to the container & impossible to remove. Literally can not get it out of the container. It's going back to Amazon on Monday.
chilly
Well-known member
- May 13, 2006
- 3,110
- 992
Clay is one thing I don’t scrimp on anymore
I’ve seen the $10 clay on Amazon and I bet there is some decent stuff but as you found out it’s a gamble
For over the counter clay I have bought a lot of the Megs and Mothers kits over the years
Not the most aggressive but safe and I feel a good value
Sent from my iPhone using Tapatalk
Sent from my SM-G991U using Tapatalk
I dig that blue. It really pops.
I don’t think it is the blue that’s actually popping, it’s the 64 different toppers and layers he has on it.
But I agree it looks good and he does a great job keeping it detailed.
dieselfan1
Member
- Apr 1, 2021
- 247
- 0
64?I don’t think it is the blue that’s actually popping, it’s the 64 different toppers and layers he has on it.
I lost count at 257
Sent from my SM-G991U using Tapatalk
PA DETAILER
Well-known member
- Mar 5, 2011
- 6,017
- 251
Sadly the PA weather will be changing soon to WINTER. Saturday was rain all day, so did inside stuff. This morning the usual wash/detail on the ZR2.
Big Dave
Well-known member
- Jan 7, 2018
- 3,869
- 2,311
I had a $10 credit to use at one of the local auto parts stores, an encouragement to come out and spend now our lockdown is over. So I wandered the aisles, eventually came out with a new glass cleaning mitt, which was 25% off as well, and I needed an air freshener, and that was half price, only $10 out of pocket all done. So I cleaned my windows today inside and out, but I've decided to use the new mitt only on the inside. And yes, the air freshener is from Armor All, I think it's the only product of theirs I still use. View attachment 74517View attachment 74518View attachment 74519View attachment 74520View attachment 74521
Sent from my F8331 using Tapatalk
Sent from my F8331 using Tapatalk