What else do I need?

jbrown287

jbrown287

New member
Joined
Jun 21, 2011
Messages
106
Reaction score
0
About to order a DA and some supplies. Let me know what else I will need to get started and any reccomendations.

This is what I am going to order:
Griots garage polish & pad kit
wolfgang deep gloss combo
Pinnacle sig series 2 carnuba wax
Megs 105 & 205

I have the megs clay kit already. All help will be appreciated.
 
get a shampoo,couple of grit gaurds.perhaps a apc for tires and wheels.wait till friday to get free shipping /with spending at least 95.00$ ag lines will be 20%off on friday
 
I have a foam gun with DP coming in another order. This order is to really finish the car out good. Have sonax, tire gel and 2 bucket system already along with a bunch of locally bought stuff. Mostly glass cleaner and interior stuff. Is there anything else that I need to finish the paint out?
 
the gg6 has a 6 inch backplate to use 6.5 pads I believe . I got the lc 5"bp to use 5.5 pads
 
The griot garage come with a 6" backing plate. if you put a 5.5" pad on there you will leave the edges of the backing plate expose and it will cause damage to your paint. you need to buy a 5" backing plate for 5.5" pads.

Most likely you will need more pads. 2 of each is enough, but its better to have atleast 4 compound/polish/wax. They get ripped, dirty, they drop and you always want a new one ready to go. I like the hydro pads and surbuff pads for more cutting.

Save money on wax and get collnite 845 or finsh kare 425. They are way cheaper, last way longer and most people can't tell the difference. You really don't gotta spend alot of money to get good results. purple power(a degreaser) is just as good as sonax when you scrub it a little.

Get a daytona speed master brush. these things are a must for spoke wheels and engine bays. If you have dirty carpets try a DA brush

Porter Cable 7424 & Ultimate Detailing Machine Carpet & Upholstery Brushes
 
I was thinking about giving AG a call and seeing if they would swap the pads for 5.5. Then I would just have to buy a 5 backing plate. Thanks for the suggestion on the wax and stuff I will have to look into them.
 
ya give them a call and see what they can do for you. Its a real PIA to change backing plates and pads sizes all the time. I have the GG DA and the 6" backing plate and some 6.5" pads. The 5.5" ones are way better. I don't use the larger ones any more.
 
You must log in or register to reply here.
Back
Top