What kind of pressure water fitting is this?

You need to remove the wand from the gun/trigger assembly, this is where you will be installing the foam cannon. Take a look at the fitting on the wand that you removed from the trigger, you need a fitting that looks like this because the foam cannon will fit onto the gun in the exact same way so the fitting will be the same.

Once you determine which fitting that you have, compare it the fittings that we offer and then the one that matches up.

Hint: Most gasoline pressure washers will use the Kranzle

HP-attachments.jpg
 
Whoa... that's bad timing. The site you posted is unavailable till August 24th, 2009
 
Why is a Pressure Washer Foam Gun double the cost of a Garden Hose Foam Gun ?

What makes it that way ?
 
Now that is funny as I was just oin that site I will post another link
 
2003 GMC Denali said:
Why is a Pressure Washer Foam Gun double the cost of a Garden Hose Foam Gun ?

What makes it that way ?
Click to expand...


2 different animals .As one attaches to a standard garden hose and the other attaches to a pressure washer so it has to handle alot more pressure .Hwnce a much better foam( equals much more fun ) As I have both types
 
Superdutytd said:
And then I can use the Kranzle I take it while still having the quick change setup?


I don't really want to remove my wand from the gun as it is a PITA to take in and out and I like to use my pressure washer for actual washing also. The kranzle is the only thing I see that could work though.
Click to expand...

You will be able to just swap it like you do the spray tips
 
Superdutytd said:
Anyone help me out? I'm thinking about ordering a foam cannon.
Click to expand...

In these pictures as I can see is that your not using a kranzle setup . You have are using a 1/4 wand setup with a female quick release to change the spray tips . So all you need for the foam canon to adapt is the 1/4 male quick disconnect adapter to connect the same way as you do the spay tips.
 
rwisejr said:
In these pictures as I can see is that your not using a kranzle setup . You have are using a 1/4 wand setup with a female quick release to change the spray tips . So all you need for the foam canon to adapt is the 1/4 male quick disconnect adapter to connect the same way as you do the spay tips.
Click to expand...

So I don't need one of the adapters from AG then? I'm sorry I've never seen pictures of the foam cannon setups up close. I take it the 1/4" threaded end goes into the foam cannon?
 
Superdutytd said:
So I don't need one of the adapters from AG then? I'm sorry I've never seen pictures of the foam cannon setups up close. I take it the 1/4" threaded end goes into the foam cannon?
Click to expand...

Exactly !!!!!!!!
 
Thank you for posting this! I am not quite ready to buy a Foam Cannon yet, but I didn't know what the threads into it were. Now I know that I can just pick up the Quick Dis-1/4" Male adapter and keep my setup.

DLB
 
Dalton Blevins said:
Thank you for posting this! I am not quite ready to buy a Foam Cannon yet, but I didn't know what the threads into it were. Now I know that I can just pick up the Quick Dis-1/4" Male adapter and keep my setup.

DLB
Click to expand...

No problem !!!!!!!!!
 
You must log in or register to reply here.
Back
Top