What should I use as a follow up after PO91E?

keifer75

New member
Joined
Sep 7, 2009
Messages
51
Reaction score
0
Hello everyone. I have a 2007 Obsidian black pearl that I am looking to remove some swirls caused by crappy microfiber & wash products( back before I knew anything about Autogeek and proper towels). I was wondering what be a good follow up to P091E? I plan on using the PO91E with a white lake country CCS pad to start. Is this the right pad to start with ? Any input would be greatly appreciated.
 
Use 106FA after. If you really want to shine it up more. Use 85RD with a blue pad to jewel the paint as a third step.
 
Hello everyone. I have a 2007 Obsidian black pearl that I am looking to remove some swirls caused by crappy microfiber & wash products( back before I knew anything about Autogeek and proper towels). I was wondering what be a good follow up to P091E? I plan on using the PO91E with a white lake country CCS pad to start. Is this the right pad to start with ? Any input would be greatly appreciated.
Start with a white pad and move up to an orange if it doesn't cut it. Move down to 87mc or PO85rd for less cut. Use a gray pad for these finishing polishes or move up to a white if necessary.:buffing:
 
Use 106FA after. If you really want to shine it up more. Use 85RD with a blue pad to jewel the paint as a third step.

You can't do PO91E and 85RD right after ... 106FA really needs to be used ?
Both have 5 for gloss but 106FA have more cut...is there another difference?
Thanks.
 
You can't do PO91E and 85RD right after ... 106FA really needs to be used ?
Both have 5 for gloss but 106FA have more cut...is there another difference?
Thanks.
Depends what pad you use for the IP. IP w/a orange, I would use the 106FA after. IP w/a white, you can use the 85RD
 
Depends what pad you use for the IP. IP w/a orange, I would use the 106FA after. IP w/a white, you can use the 85RD

Ok I understand.
And what about the pads ... 106FA with a gray pad and 85RD with a blue pad ?
Thanks.
 
Last edited:
Yes it is a Subaru wrx, sorry that i forgot to ad that info.
 
ok just bring this thread back a little
so let me get this straight.
- PO91E with white pad and only use orange if I do not get results?
- Next would be 106FA with a gray pad. (Is this step necessary if the PO91E yields good results?)
- After this I would just follow up with a sealant? Just want to make sure I am doing this process correctly. I would greatly appreciate any input.
 
ok just bring this thread back a little
so let me get this straight.
- PO91E with white pad and only use orange if I do not get results?
- Next would be 106FA with a gray pad. (Is this step necessary if the PO91E yields good results?)
- After this I would just follow up with a sealant? Just want to make sure I am doing this process correctly. I would greatly appreciate any input.
You will get some miro marring from PO91E...you will need to finish down with a finer polish like 106 or 85rd or both.:buffing:
 
Back
Top