what steps/products to use on 2006 Black VW Jetta

SilverBullet_01

SilverBullet_01

New member
Joined
Mar 15, 2010
Messages
32
Reaction score
0
Need some help, since this is the first time I am going to polish a black car.

These are the steps I plan on performing:

1. wash

2. clay bar

3. wash

4. the main step:
a) Menzerna Super Intensive + orange pad

 b) If Super Intensive was not enough for some areas, use:
 Menzerna PowerGloss + yellow pad
​
5. wash

6. Menzerna Super Finish + white pad

7. Menzerna Power Lock Sealant + blue pad

8. leave it for 12 HOURS

9. WHICH WAX?

1) I do not have too many choices except these:
P21 (the old one I believe)
SS2
Pinnacle Souveran Liquid Spray Wax
​
What should I use?

2) If I have to use Powergloss, do I need to follow up with the Super Intensive, or can I go directly to Super Finish?

3) Do I have the "wash" steps in the right order? Should I change/add/remove any of those?

4) Any other comments are appreciated.

Thank youuuuuuu!
 
correction for step#6
the product is SF 4500, sometimes called super finish, sometimes ultimate finish
 
SilverBullet_01 said:
Need some help, since this is the first time I am going to polish a black car.

These are the steps I plan on performing:
Click to expand...

I like your plan. However, I'm just curious... How long do you think it will take from step 1 to 7? Is it really necessary to leave the sealant on the paint for 12hours?

I'm looking forward to see the results on this one
 
steps 1-5 are the worst, after those it's a piece of cake :)

it's gonna take a long time, many corrections to be performed, and the car is black, so it shows everything
i will have before and after pictures for sure

for best results/protection it is necessary to leave it on for 12 hrs ... sealant needs to cure to fully bond to the paint
 
this car has been abused ... instead of "ill use powergloss only where i need it", now I use it pretty much everywhere

after powergloss, I go to super intensive - but when i use my microfiber to wipe it off, i get crazy looking scratches/streaks or whatnot ... i was speechless
anyways, I had to use the third, finer polish to rid of those ridiculous things - and still could not get rid of everything

to get an idea what im working with:

pic9.jpg
 
^ i just read what i wrote, maybe i should rephrase it:
powergloss worked great as step1
the surface, after SIP, was acceptable as step2 . Microfiber was then used to clean up the remaining polish, but instead, the towel was leaving marks, and to me those looked like "mini" scratches (the surface looked worse than after step2) - never seen anything like it before ...

took me a while to figure this out, but this was the key -> much finer polish (super finish) was used afterwards and "mini" scratches disappeared even tho the same towel that was leaving "marks" was used.

should have more pics, and the final product, ready by Thursday ... I Hope.
 
super finish - less aggressive, and more shine, since this is a finishing polish
and power finish is more aggressive, less shine, used for polishing
 
You must log in or register to reply here.
Back
Top