White revisited

scooterguitar

scooterguitar

New member
Joined
May 14, 2006
Messages
970
Reaction score
0
Getting ready to do a really nice vehicle that has been well kept, all white.
I am thinking either UPP or EX-P
Topped with Natty, Nattys Blue, or Max Wax
Suggestions as to what to play around with? I knwo ahwile back someoen told me do Nat Blue for white.
 
Probably me, I have two layer's of EX-P and two layers of Natty's Blue on my white suv. And damn does it look good, I've had guys at the office asked what I used b/c they've never seen white look deep and wet (most detail their cars like crazy, Porsches, Rovers etc). Did you check your PM's, think I sent you one earlier?

UPP and Natty's Blue should look great as well.
 
Last edited:
If it's a vehicle that you're going to see regularly, I would use a glaze under the wax instead of a sealant. this option is not going to be as durable, but will have a better overall wetness.

if not, UPP/NB gets my vote.
 
white is a very hard color to amplify and look good. I would highly suggest glazes, waxes, and gloss enhanced QD'ers. If it were me ... Megs 7, DP Max Wax or Sig Series II, and then FK425 or Poorboys Spray and Shine a couple hours later.
 
Neothin said:
If it's a vehicle that you're going to see regularly, I would use a glaze under the wax instead of a sealant. this option is not going to be as durable, but will have a better overall wetness.

if not, UPP/NB gets my vote.
Click to expand...
Exactly what i did on a white car. CK VMHG with PB's EX, CK QD'er
 
abrcrombe said:
Looking good. Is that a 300c?
Click to expand...
Yes, 2005 300 C. The swirls were so deep i thought this on would kill me .
 
Did you just used the ClearKote glaze for the swirls or did you use some polishes?
 
abrcrombe said:
Did you just used the ClearKote glaze for the swirls or did you use some polishes?
Click to expand...
The swirls where so deep i used intensive polish,then i followed up with the VMHG.
 
You must log in or register to reply here.
Back
Top