why do I always get these?

jamores23

jamores23

New member
Joined
Dec 17, 2008
Messages
974
Reaction score
0
I got this job scheduled for this weekend. Its a acura rsx and this is probably worst than the gmc envoy I did when it comes to water spots..... this car looks like a rainbow when the sun hits it..
jenscar.jpg
 
hey there Adam, max, ummm, m105 with a wool pad, i got away with it on the gmc envoy with a mf cutting disc on a da with m105 but this looks worst.. hopefully it will come out. Any suggestions from anyone else out there? Im thinking m105 on da with mf system, if not, i dont really have a good wool pad other than these crappy lc purple foam wool pads that I dont like, so it would be that, lcpfw on rotary with either m105 depending on the weather, or menz power gloss followed by either d301 finishing wax, or menzerna SIP on white pad and maybe as a extra just do the hood with po85rd and top it off with wgdg and wg fuzion.
 
That should clean up just fine. Looks like someone forgot the rinse cycle on their last wash
 
Looks like some nice hard water. Use a pH neutral shampoo and it should take care of it. Or at least not induce more.
 
Flash Gordon said:
That should clean up just fine. Looks like someone forgot the rinse cycle on their last wash
Click to expand...

lmao flash, im telling you brother, I can always count on you to get a good laugh! believe it or not the gmc i did had water spots that were well into the clear and it took 2-3 runs with m105 and mf cutting disc to get them off! it wasnt fun i tell you.

YouTube - ‪Foghorn Leghorn (*** BLEEPED ***)‬‏
 
jamores23 said:
hey there Adam, max, ummm, m105 with a wool pad, i got away with it on the gmc envoy with a mf cutting disc on a da with m105 but this looks worst.. hopefully it will come out. Any suggestions from anyone else out there? Im thinking m105 on da with mf system, if not, i dont really have a good wool pad other than these crappy lc purple foam wool pads that I dont like, so it would be that, lcpfw on rotary with either m105 depending on the weather, or menz power gloss followed by either d301 finishing wax, or menzerna SIP on white pad and maybe as a extra just do the hood with po85rd and top it off with wgdg and wg fuzion.
Click to expand...

You need to keep in mind that this is Honda paint... therefore it's going to be much softer than the paint on that Envoy you did.

Always use the least aggressive method to get the job done.
 
true, thanks shiny! hey shiny did you see the thread I put about the gmc wheels I did, i went based upon what you told me about them not being chrome and not to use opt metal polish, i used m105 and they came out awesome but the center cap i think is plastic and there were fine scratches left behind, suggestion?
 
Wow! That's crazy! Is that from a lawn sprinkler? Those are the worst!
 
You must log in or register to reply here.
Back
Top