Wich Menzerna product to use ?

R

Ri0uXx

New member
Joined
Nov 25, 2010
Messages
10
Reaction score
0
Hi, i recently bought a 7424XP porter cable with

Menzerna intense polish P091E
and
Menzerna Micro Polish P087MC

with

CCS country Lake pad

orange
white
grey

so my car is in great condition, it's a 2010 Genesis Coupe with 27 000 km ( like 13 000 miles ) already been detailed by a local body shop....My car as very very LIGHT swirl..
but the " biggest " problem iare hologram on the paint... maybe leaved by the previous " compound... "

i was thinking to use micro polish with a white pad + menzerna power lock + wolfgang fuzion

the question is : am I doin right with these products ?

here is a picture of the car... I circled an " hologram " to show you !

thank you :props:

 
First that ride looks nice with those wheels, second your process looks great, micro polish rocks :)
 
Is it neccessary to make a second pass with a grey pad ? with the micro polish ?
i want the car very shiny :)

thanks
 
Following up IP with the micro will add gloss.
 
i dont understand :S

I should use intensive polish before micro ?


i was talking about

1st pass : micro polish - white pad
second pass : micro polish - grey pad

?
 
IP has more cut than micro. Meaning it will remove more defects if needed. See chart below:
Menzerna Polishing Compounds Products of Germany

Now you will also see that micro has more gloss than IP. Meaning it will finish down better and make your paint shine. If you are going to do 2 steps, go IP w/a white pad and then follow with the micro w/a gray.

I would skip the power lock and just use the fuzion personally.
 
Take a look at the cut to gloss ratings, this will tell you which one to use first.

LiquidSummary31510.jpg


Also, on the side of the bottle there's a handy gage that tells this as well...
 
You must log in or register to reply here.
Back
Top