Wolfgang Duo PC question

[BR997S]

Hello - Went to Mike's :dblthumb2: (most excellent!!) detailing class and just ordered the PC7424XP with the Wolfgang Duo kit. My car has minor swirls. I plan on trying the Wolfgang Finish Glaze on a test section first to see if this removes the swirls. If not, then using the Wolfgang Total Swirl Removal and then the Finish Glaze. Also, I like P21S wax. Should I use the paintwork cleanser before waxing? Or is this not necessary with the above steps? Does this sound like the correct plan?

Thank you for sharing!

 

[MoBenzOwner]

I wouldnt use the Paintwork Cleanser when applying wax after the Finish Glaze. I would go straight to the p21s, reason being the cleanser would remove the fillers left behind by the glaze. Now, if this is not a traditional type glaze, i.e. has little to no fillers(I'm not familiar with this particular product) it certainly wouldnt hurt to use the paint cleaner first.

 

[Mike PhillipsMike Phillips is verified member.]

After the Finishing Glaze you can go straight to the P21S with no problems and in fact your paint will be very glossy after wipe-off as that's one of the characteristics of the P21S

Do you let the P21S dry hard before removing or buff off shortly after it hazes...

 

[BR997S]

I buff off the P21S wax shortly after it hazes

 

[1hawaii50]

You're going to love the Wolfgang products! I'm sure I'm missing out on a lot of good products, because I've found that I like the Wolfgang products so much, that I use them exclusively.

:righton: