Wolfgang Finishing Glaze

[Pjstockford]

I bought a 2012 Honda Civic Si, Black, and detailed it a couple weeks ago. It came out great! I received some advice on this forum and went with the suggestions. I did the following:

Clayed
Foam gun
Wolfgang TSR with Flex & Lake Country Orange pad

Then I topped with Pinnacle sig series II to protect, as it sits outside.

Now I would like to use Wolfgang Finishing Glaze to completely finish my work. Do I need to use paint prep to remove the wax before I use the finishing glaze, or just wash, glaze, and then top off with the wax again?

 

[MattPersman]

The name says glaze but it’s actually a fine polish. You can wash then use the Wolfgang on it followed by the pinnacle


Sent from my iPhone using Tapatalk

 

[SWETM]

Are you not satisfied with the finish you got from the Wolfgang TSR?

If you are satisfied I would not polish with the finishing glaze as mentioned above it's a finishing polish. And if you are not satisfied with the clarity you got. A wash and repolish is fine to do. Then reseal with your prefered LSP.

 

[Pjstockford]

I am satisfied to a point. I’ve never used the glaze and thought I would take it to another level as an experiment to see if I can achieve an even better look.

 

[Pjstockford]

My real question is do I need to take the wax off with a paint prep or can I just start the finishing glaze process

 

[Coopers ST]

The finishing glaze will remove the wax.

 

[SWETM]

My real question is do I need to take the wax off with a paint prep or can I just start the finishing glaze process

Go ahead and polish with the finishing glaze. It will remove the wax.