Wolfgang Souveran kit ?

M

mcoccia

New member
Joined
Dec 19, 2011
Messages
20
Reaction score
0
Little confused here with the kit. Do I lay the Souveran wax over the paint sealant immediately or do I buff the sealant first then lay the wax?

Merry Xmas:)
Mark



Sent from my Galaxy Nexus using Tapatalk
 
Apply the WG sealant to the entire car 1st. Then wait about 40 minutes and buff it out. You should wait atleast 1-2 days to let the sealant cure before you use the S wax. Apply to one panel at a time and then buff the wax off. :xyxthumbs:
 
ssnobrakes said:
Apply the WG sealant to the entire car 1st. Then wait about 40 minutes and buff it out. You should wait atleast 1-2 days to let the sealant cure before you use the S wax. Apply to one panel at a time and then buff the wax off. :xyxthumbs:
Click to expand...

Where did the 40 minutes come from before buffing off the sealant? I just applied it to my car and went over one side then buffed it off. The bottle doesn't say anything about waiting 40 minutes.

Does this mean I have to do it again?

EDIT: I looked at the AG site and it does list waiting 35 to 40 minutes before buffing. Looks like I'll be doing a 2nd coat tomorrow......or after Christmas. It'll give me another reason to rub on my car :-) I sure wish they would put info like this on the bottle!!!!
 
I am assuming I can drive for a couple of days then wash with my no rinse wash then apply the wax, is this correct?

Sent from my Galaxy Nexus using Tapatalk
 
mcoccia said:
I am assuming I can drive for a couple of days then wash with my no rinse wash then apply the wax, is this correct?

Sent from my Galaxy Nexus using Tapatalk
Click to expand...


Yes, you want the sealant to cure fully before applying wax. Shouldn't be a problem washing with no rinse.
 
Thanks

Sent from my Galaxy Nexus using Tapatalk
 
You must log in or register to reply here.
Back
Top