Yellow Mustang with embedded dirt...help please

C

cmeyers1

New member
Joined
Apr 14, 2015
Messages
3
Reaction score
0
I am newer to using a da, I have griots garage 6" and chemical guys hex logic pads. I am having a hard time getting the embedded dirt from the finish. I think this car sat under a tree for years prior to getting it. I have clayed it, compounded, polished just the hood so far. I started on the bumper and front clip but it's not coming out. Pictures are hard to see but perhaps you will be able to help me.mequiars UC, meguairs UP, and mequiars UW.
 
cmeyers1 said:
I am newer to using a da, I have griots garage 6" and chemical guys hex logic pads. I am having a hard time getting the embedded dirt from the finish. I think this car sat under a tree for years prior to getting it. I have clayed it, compounded, polished just the hood so far. I started on the bumper and front clip but it's not coming out. Pictures are hard to see but perhaps you will be able to help me.mequiars UC, meguairs UP, and mequiars UW.
Click to expand...

Have you used a clay bar or nanoskin (clay mitt) prior to washing and Ultimate Compound? If not, you really should clay the car to remove the top portion of contaminants which very may well remove that embedded dirt.
 
Yes, I clayed the car after washing and prior to beginning the da process.
 
I think I have the same problem, but for mine it was only a small spot, like a blemish. I'll post some pics in this thread later. The car came directly from the manufacturer btw and I had seen this blemish ever since I got it.
 
You must log in or register to reply here.
Back
Top