To Collinite, or not to Collinite. That is the question.

Shakabruddah808

New member
Joined
Apr 5, 2012
Messages
233
Reaction score
0
Good morning, fellow Autogeeks!

Although winter is still quite a few months away, it never hurts to be prepared for winterizing my car's finish. I'm currently putting together what I'll need and begin winterizing when the moment's right.

I currently use Natty's Blue Paste, topped off with OCW after every wash. A stunning combo to be sure, but not that winter-proof. So I've been looking at adding Collinite 476 to my collection.

If anyone can provide feedback, I'd greatly appreciate it. I've done web searches and the answers are split in regards to applying, removing and durability. Some say it's easy to apply and remove. Others say that it's difficult to work with. And others say that it's overrated and the durability is not up to par. Confusing to say the least.

What are your thoughts?
 
Not sure why anyone would say its durability is not up to par, and that it is over-rated. I think one would have to search long and hard to find a more durable paste wax.

I would assume just like any other LSP product, the trick to getting the most durability from it will be applying it to clean paint.

Same procedure as if applying a sealant, or even a coating. Clay, polish if needed, and a wipedown with something like Carpro Eraser, or a mild IPA Mixture sure wouldn't hurt.

Thin application. On white paint, it is a little hard to see going on, and one might over-apply. I would often look at an angle when applying to see where I've been. Whether Sponge, or MF Applicator, I always would dampen the applicator periodically as I went.

I commonly would start at he roof, then Hood, then just walk around the vehicle, and by the time I was finished applying, I was usually good to then begin removing where I first applied, then simply walk around the vehicle again and remove in the same order. The swipe test will tell you, but I always allowed some bit of cure, and drying time, never have applied, then immediately wiped off.

After all is off, I would usually go back again with another clean Towel insuring that all of it is removed.
 
You could try C845 instead as it is said to be easier to work with.
I tested Sonax PolymerNetshield on a DD for 3 months and I look no further for durable LSPs any more. waxes are a whole different ballgame but for sealants, Sonax PNS is great.
 
Good morning, fellow Autogeeks!
And others say that it's overrated and the durability is not up to par. Confusing to say the least.

I'm not sure where you came across that information. While not everybody like the products, it is still well respected. They seem to have a great reputation.

You could try C845 instead as it is said to be easier to work with.

Agree since it's a liquid vs a paste. I say that only because I've applied 845 with my DA and it's super simple. I've not tried 476 since it's a paste. The only trick with 845 is to make sure it's warmed up properly and you shake it well enough to thoroughly mix it up.

I ran a daily driver with a single coat of 845 though last year's miserable mid-west winter. The car was caked in salt for long periods of time and occasionally cleaned with a touchless car wash. Miserable, tough conditions. Despite all that, there was still evidence of protection six months later.

According to Collinite's web site 476 is supposed to be even more durable that 845. If true, you should have no issues getting through winter.
 
I'm not sure where the durability complaints come from but, I would guess it has something to do with what is applied prior to the Collinite. I have noticed that #915 does not last quite as long when I use it topping BlackLight.
I have also noticed that its durability is limited when I use some shampoos like Citrus Wash and Gloss from CG. I know that now so I avoid it. In preparation for winter I use just #915 and I have zero issues with it lasting well beyond what winter has to offer here in central Ohio.
 
Good points about what types of shampoos-detergents and how strong the concentration to use after application. Basically holds true with any LSP.

#476 Collinite is a product which is very economical, consider that if you were to use #476 every 3-5 months, you will have this can of product for literal years. That if you are happy with the application, the look, and the protection it offers, this product will maintain-protect your finish for many years on end.

I can personally attest that my own 1997 Tahoe's finish is in such pristine condition because #476 was used on it for a good number of years to protect.

Cost per application is literal pennies IMO.
 
I'm not sure where you came across that information. While not everybody like the products, it is still well respected. They seem to have a great reputation.



Agree since it's a liquid vs a paste. I say that only because I've applied 845 with my DA and it's super simple. I've not tried 476 since it's a paste. The only trick with 845 is to make sure it's warmed up properly and you shake it well enough to thoroughly mix it up.

I ran a daily driver with a single coat of 845 though last year's miserable mid-west winter. The car was caked in salt for long periods of time and occasionally cleaned with a touchless car wash. Miserable, tough conditions. Despite all that, there was still evidence of protection six months later.

According to Collinite's web site 476 is supposed to be even more durable that 845. If true, you should have no issues getting through winter.

^^this.

I have read on the AG forums that 476 can be a little difficult to remove, but haven't seen anything questioning its durability. I've gone with 845 and it is very user friendly and durable. You need to read this if you are going to try 845: http://www.autogeekonline.net/forum...e-845-definitive-how-guide-legendary-wax.html
 
I've applied #476 per directions which is one panel at a time w/o a problem. The next time I did it, which was probably a month later (yes, I'm an admitted "product waster") I applied it to the entire car and THEN removed it, once again, no problem. Finally, probably another month later, I applied it to the entire car and let it sit for an entire day, down in the garage and removed it the next day w/o a problem again, so atleast in my experience I've had NO issues wiith #476. Honestly I don't see how others have the problem with it, the only thing I can think of it applying waaaay too much, there are noobs here with "old school" mentality, I think this could be the issue.

I actually plan to do my winter prep with #476 and will apply 2x's, probably sometime in mid October, I have complete faith in the product! I should also mention I have a very good base laid down of DGNCC too, so I expect to get through winter w/o an issues!!!

Sent from my SPH-M930 using AG Online
 
I actually plan to do my winter prep with #476 and will apply 2x's, probably sometime in mid October, I have complete faith in the product! I should also mention I have a very good base laid down of DGNCC too, so I expect to get through winter w/o an issues!!!

Sent from my SPH-M930 using AG Online

Two coats of 476 on top of your five layers of DGNCC and now many layers of 915? At this point I'd bet the layers of LSP on your car are thicker than the paint and clear!
 
Two coats of 476 on top of your five layers of DGNCC and now many layers of 915? At this point I'd bet the layers of LSP on your car are thicker than the paint and clear!

Yeah that's true enough, although not sure how much of the DGNCC has really stood up, I mean like I said before in another thread, when I applied the 3rd coat after a 2 month period of just maintaining with DG rinseless and AW, the difference was amazing, this told me the shine was diminished. Now, that said, was it the pollen we had in the spring, maybe, I don't know but what I do know is the shine after the 3rd coat was insane! As far as durability goes, it would still bead but the beads weren't real tight either. Coats #4 and #5 were done because I wanted to, no other reason and the application of #915 was to see how this would look on my black car as others have posted many times about how awesome it is on black and I can report back to the group, IT IS:dblthumb2:

Hopefully we don't have another winter like last year but I just wanna see how well the #476 holds up and yeah, having a good base of DGNCC laid down underneath it isn't going to hurt one bit either, so I'm good no matter what, just wish I knew if the diminishing gloss also meant the durability was down as well.
 
I've been looking at adding Collinite 476 to my collection.

If anyone can provide feedback, I'd greatly appreciate it.
"Old School" Collinite #476 Paste Wax is a graduate from the same Institution as Turtle Wax Hard Shell Paste Wax, Simoniz Original Paste Car Wax, and other similar classmates: too many to mention at this time and place.

•They've all been around the block a time or two...
and still know how to take care of business.

What are your thoughts?
•They're all badazzz paste waxezzz!!! :props:

Bob
 
To add to Bob's "old school" comments, it also smells "old school", no "flavor of the month" smells when you open it up, just a chemical smell like your used to....well, those of us of a certain age anyways, LOL!

Sent from my SPH-M930 using AG Online
 
To add to Bob's "old school" comments, it also smells "old school", no "flavor of the month" smells when you open it up, just a chemical smell like your used to....well, those of us of a certain age anyways, LOL!

Sent from my SPH-M930 using AG Online

Yep, the smell is like ole Doc Brown's comments in back to the future, "When this baby hits 88mph you're gonna see some serious Shyt"! Same with Collinite, that smell is "all business", no banana this, or coconut that.
 
Yep, the smell is like ole Doc Brown's comments in back to the future, "When this baby hits 88mph you're gonna see some serious Shyt"! Same with Collinite, that smell is "all business", no banana this, or coconut that.

Ditto. I like the smell of 845, kind of like kerosene or paint thinner. Car products are supposed to smell like a garage and the machines they are being applied. Save the fruity odors for infant/child hygiene products.

One of my most memorable sensory memories was as a high school kid getting a tour of a local Air National Guard maintenance hanger. The combination of jet fuel, hydraulic fluid, and steel subjected to high temperatures was an amazing scent that I still remember today. Wish I could bottle it as an air freshener, but I doubt it would be wife approved...
 
I would highly recommend the 476. I have never had an issue with application or removal. I have yet to find anything that lasts as long either. Love it for the winter.
 
https://www.youtube.com/watch?v=k0kswK2aI08

One of the all time great movies scenes that I always loved! Sorry I didn't include it in my last post.

And that's Collinite, some "serious shyt"! LOL As good as any Blue Coral I remember, but better, and easier to apply-take off.
 
Ditto. I like the smell of 845, kind of like kerosene or paint thinner. Car products are supposed to smell like a garage and the machines they are being applied. Save the fruity odors for infant/child hygiene products.

One of my most memorable sensory memories was as a high school kid getting a tour of a local Air National Guard maintenance hanger. The combination of jet fuel, hydraulic fluid, and steel subjected to high temperatures was an amazing scent that I still remember today. Wish I could bottle it as an air freshener, but I doubt it would be wife approved...

"I Love the smell of jet fuel in the morning"
 
Yep, the smell is like ole Doc Brown's comments in back to the future, "When this baby hits 88mph you're gonna see some serious Shyt"! Same with Collinite, that smell is "all business", no banana this, or coconut that.

Ha! "No banana this, or coconut that"!

Also, I love that movie...

I vividly remember a car that would come through the car wash I worked at, back in 2009. The water would just not stay on the finish. Every time this guy came to the wash the water would just repel from the paint. It was a Ford Escape, I believe.

I ended up asking him what he used, and he said that he got it at Harbor Freight, and it started with a"C" in a white tin can. He came through again, and confirmed that it was Collinite. That was some pretty serious stuff. It was a lot like the Turtle Wax Ice Paste we at the wash had been using. Great beading, and durability, but the behavior of the water was different. The Collinite just ran away from the paint. I'm with you with the desire to add it to my collection of waxes. I say go ahead and get some.
 
Yeah, Collinite is really great stuff! I would say it as well as DG are the "blue collar" LSP's here :dblthumb2:
 
Collinites are good. They are my winter protection. 476 and 845 smell like RAID to me.
 
Back
Top