Buff and Shine pads
- Thread starter Roger T
- Start date
ski2
New member
- Dec 2, 2011
- 1,826
- 0
I don't understand why he recommends the Hexlogic pads over flat pads. It would seem to me that flat pads put more polishing surface on the paint and that spent product and removed clearcoat could build up in the grooves of the Hexlogic pads.
The B&S flat pads work great and are very durable. The orange and yellow cut very well but leave a LSP ready finish when used with a polish on hard clear.
The B&S flat pads work great and are very durable. The orange and yellow cut very well but leave a LSP ready finish when used with a polish on hard clear.
dlc95
Well-known member
- May 18, 2013
- 6,062
- 26
One of the reasons I like the hex design is because of how it aides in reducing friction induced heat build up, and how the pad handles on the paint surface. What I don't like is that 100% of the surface isn't being utilized...
I agree with the assessment of the Yellow and Orange pads. The green is pretty potent as well. Very versatile.
spiralout462
New member
- Dec 14, 2012
- 1,771
- 0
OP: Have you tried either of the pads you mention? Pad choice is usually a personal preference kind of thing. Any pad from a reputable manufacturer will yield great results when used with the correct polish and proper technique. My advice would be to try several and see which suits YOUR tastes.
WRAPT C5Z06
New member
- Nov 12, 2009
- 12,615
- 0
Junkman is an idiot, go with B&S flat pads. They are better for sure.
swanicyouth
New member
- Mar 3, 2011
- 9,388
- 0
Calendyr
New member
- Jun 9, 2013
- 3,996
- 0
Not sure about which is better but I do disagree with your first statement.
Bunky
Well-known member
- Jun 20, 2007
- 6,427
- 148
Before investing in the Hex Logic pads based upon the recommendation of one person, I would suggest trying the cheaper and easier to get flat pads. I suspect you will find them great too.
The theories of why pads with various patterns (dimples, hexagonal bumps, waffle) are endless. They just reduce contact area (possible less stickiness or heat) and never understood their advantage when using a DA and diminishing abrasive polishes.
The theories of why pads with various patterns (dimples, hexagonal bumps, waffle) are endless. They just reduce contact area (possible less stickiness or heat) and never understood their advantage when using a DA and diminishing abrasive polishes.
silverfox
New member
- Oct 5, 2010
- 2,813
- 0
I'm of the opinion that getting as much surface area of the pad on the paint as possible is an advantage. Why do you think MF buffing pads are so effective? Anything with dimples adds buffing time. I understand the thinking behind them (less frequent need to add product), but if time is money...dimples are working against you.
blown03
New member
- Mar 14, 2013
- 217
- 0
+ 2 , I've never had an issue w/ him , he's talented , giving and helps allot of newbs. If AGO sold Hex logics I'd try them once .
Daren
KBsToy
Active member
- Jul 4, 2011
- 1,490
- 0
:xyxthumbs:
I myself have used their M/F pads on wife's car and they worked great...Of course this comes from a weekender detailer :buffing:
Roger T
New member
- Jan 21, 2014
- 68
- 0
- Thread starter
- #17
After 15 unrelated replies to my original question "Does Autogeek plan to carry Hexlogic buffing pads?", i still do not know the answer.
I hoped that Mike or Nick or someone else from Autogeek would tell me.
Instead I got all this other.
Roger T
I hoped that Mike or Nick or someone else from Autogeek would tell me.
Instead I got all this other.
Roger T
Junkman2008
New member
- Mar 5, 2010
- 315
- 0
Hey Roger, to be exact, I only recommend Hex-Logic pads for the PC-7424XP or similar orbital polisher. In my opinion, they do more work with a orbital machine, which lacks the power to get stuff done quickly. At the same time, I do not recommend them for a true dual-action machine like the Flex 3401VRG because they tend to make the machine "walk" all over the place and hard to control. For that type of machine, I personally recommend a flat surface pad, to which I have no preference as long as the pad has a flat surface. I am unaware as to if AutoGeek is going to carry the Buff-n-Shine line but you can call them direct and they will tell you who carries their products. Maybe they will answer your question too.
On a side note, kudos out to those of you in this thread who promote a civil atmosphere. We all learn by sharing the information and all the "extra curricular activity" has no place here. :xyxthumbs:
Roger T
New member
- Jan 21, 2014
- 68
- 0
- Thread starter
- #19
Junkman, thanks for qualifying my statement that you recommended Hexlogic pads.
There is a thread elsewhere here that Autogeek is now carrying Buff and Sine brand pads. My question is about if Autogeek will carry the Hexlogic line of pads made by Buff and Shine.
Hope to see you on board here more often. When you speak, I listen.
As you say, " Shine On!"
Roger T
There is a thread elsewhere here that Autogeek is now carrying Buff and Sine brand pads. My question is about if Autogeek will carry the Hexlogic line of pads made by Buff and Shine.
Hope to see you on board here more often. When you speak, I listen.
As you say, " Shine On!"
Roger T
1) B&S does make hex logic pads
2) The best way to get your answer to AG plans is to call them direct
3) I wouldn't get caught up and irritated to the fact that people are trying to give their opinion on which pad is better. In most cases people have used both and are trying to lead you to a better selection. It is your money so if you wish to try something based on the recommendation of one person, then by all means try it. It might work for you where it doesn't for others.