Nick McKees37
McKee's 37 Product Support
- Jan 6, 2011
- 7,265
- 0
I received a personal message asking this question. Other forum members might have the same question, so I'm posting my response here for everyone else to see. :xyxthumbs:
Wolfgang Finishing Glaze is an ultra-fine finishing polish. It is designed to be used as the last step in paint correction. You would normally use it after Uber Compound or Total Swirl Remover.
Wolfgang Paintwork Polish enhancer is a non-abrasive pre-wax cleaner. It is designed to be used on a vehicle that does NOT have any swirl marks or scratches. You use this before applying Wolfgang Deep Gloss Paint Sealant or Wolfgang Fuzion.
Wolfgang Perfekt Finish Paint Prep is a coating-prep spray that removes polishing oils, finger prints, waxes, and silicone oils that would otherwise prevent Wolfgang Uber Ceramic Coating from bonding to the surface. This product is only necessary when you plan on coating the vehicle.
Here's the correct step for the products you outlined.
1. Uber Compound
2. Finishing Glaze (Total Swirl Remover is fine too, but Finishing Glaze will create more gloss)
3. Perfekt Finish Paint Prep (not completely necessary for application of the sealant, but it's not going to hurt)
4. Deep Gloss Paint Sealant
5. Fuzion Wax
Maintain all-of-the-above with Wolfgang Auto Bathe and Wolfgang Instant Detail Spritz.
:dblthumb2:
Hello Nick,
I have the Wolfgang Finishing Glaze 3.0 and the Wolfgang Paintwork Polish Enhancer. I just don't exactly know what order to use them when finishing up a detail. I did Uber Compound>Total Swirl Remover>Perfekt Finish Paint Prep>Deep Gloss Sealant 3.0. My concern was that if I used the Finishing Glaze that the oils wouldn't let the sealant adhere to the paint or if I used the Finishing Glaze followed up by the Paint Prep that it would remove the glaze properties. As far as the Paintwork Polish Enhancer, I am just fully lost one what to do with that one.
Wolfgang Finishing Glaze is an ultra-fine finishing polish. It is designed to be used as the last step in paint correction. You would normally use it after Uber Compound or Total Swirl Remover.
Wolfgang Paintwork Polish enhancer is a non-abrasive pre-wax cleaner. It is designed to be used on a vehicle that does NOT have any swirl marks or scratches. You use this before applying Wolfgang Deep Gloss Paint Sealant or Wolfgang Fuzion.
Wolfgang Perfekt Finish Paint Prep is a coating-prep spray that removes polishing oils, finger prints, waxes, and silicone oils that would otherwise prevent Wolfgang Uber Ceramic Coating from bonding to the surface. This product is only necessary when you plan on coating the vehicle.
Here's the correct step for the products you outlined.
1. Uber Compound
2. Finishing Glaze (Total Swirl Remover is fine too, but Finishing Glaze will create more gloss)
3. Perfekt Finish Paint Prep (not completely necessary for application of the sealant, but it's not going to hurt)
4. Deep Gloss Paint Sealant
5. Fuzion Wax
Maintain all-of-the-above with Wolfgang Auto Bathe and Wolfgang Instant Detail Spritz.
:dblthumb2: