Wolfgang Uber Ceramic Spray Coating - First Impressions Video

I've used a foam applicator with Wolfgang SCS and just rinsed it with water and let it dry and it was fine to use again.
 
Yeah I haven't noticed issues with the microfiber towels after application. I don't believe this hardens to any significant degree, although the residue out of the bottle will whiten to an extent if left to air dry. No issues with any clogging in the sprayer so far, although I did hear from one user that did have clogging with their specific bottle after months of use.
 
Loach said:
Yeah I haven't noticed issues with the microfiber towels after application. I don't believe this hardens to any significant degree, although the residue out of the bottle will whiten to an extent if left to air dry. No issues with any clogging in the sprayer so far, although I did hear from one user that did have clogging with their specific bottle after months of use.
Click to expand...
Thanks for your response!

Do you plan to put it against other products?

Sent from my SAMSUNG-SM-G935A using Autogeekonline mobile app
 
I have the Wolfgang SCC on my truck. At the 4 month mark it's still alive.
 
gorillapr said:
Updates on this products acuRA or Loach?
just wondering
Click to expand...

Last wash was just over a month ago, and if my math is right that should put it at over 7 months total, and it was still performing extremely well on the front bumper. Both the one coat and two coat sections held up great, really impressed to see it hold up like this without the maintenance aside from washing.

Everyone’s mileage may vary, I still place this product below CanCoat and on par, or in the same category as Adam’s Ceramic Spray Coating. If I was up north I would most likely want to lean towards CanCoat to reach through the winter grime with less access to routine washing, but for the Florida environment this spray protectant should hold up well if you’re performing regular maintenance washing. Right now I’m up north and most likely will be here indefinitely so this will likely be the last update for this test car.

Last time I checked the bottle it was caved in a bit again, so this likely suffers from shorter term shelf life than some others. I would aim to use this regularly if you can to get maximum use out of it.
 
gorillapr said:
Updates on this products acuRA or Loach?
just wondering
Click to expand...

I had it on my roof for 5 months and it was still doing well before I covered with winter protection.

https://www.autogeekonline.net/foru...comparison-test-3.html?highlight=Sealant+test

I also put it on half of my coated Audi hood, next to Cancoat. But haven’t done much washing lately and I don’t plan on doing regular check ins since there is coating underneath... but when it rained the other day I didn’t notice any lesser performance on the WG side, just slightly different beads than the Cancoat side.
 
I think this WG is on a league of its own right cause sounds and looks like is much better than any SiO2 spray but is not a "coating lite" like Can Coat or CQ Lite...

Well the only other product I can think that is similar is Black Ice or Adams Spray Coating but apparently those have the same durability claims but dont stand to it

Sent from my SAMSUNG-SM-G935A using Autogeekonline mobile app
 
acuRAS82 said:
I had it on my roof for 5 months and it was still doing well before I covered with winter protection.

https://www.autogeekonline.net/foru...comparison-test-3.html?highlight=Sealant+test

I also put it on half of my coated Audi hood, next to Cancoat. But haven’t done much washing lately and I don’t plan on doing regular check ins since there is coating underneath... but when it rained the other day I didn’t notice any lesser performance on the WG side, just slightly different beads than the Cancoat side.
Click to expand...

Which beads were taller.


Sent from my iPhone using Tapatalk
 
You must log in or register to reply here.
Back
Top