Aussie Muscle!

Feeling nostalgic and just a bit frustrated that it won't stop raining long enough for me to get the big girl out of the garage. So I'm watching videos of other people thrashing their XR8's instead.

Watch and listen to the stability control working overtime to control the 500hp V8 on a wet track. You can sort of hear the throttle being paused in graduations as it the ESP attempts to keep the thing pointing straight.




This grainy old video from 2010 I have watched and enjoyed far too many times. This was when the 5.0 Miami V8 was released in the FPV GT, race driver James Courtney give some jurno's a couple of wild laps of Bathurst. Just listen to the supercharger wail...............

 
We've had mostly dry days all week, temps in the high 20s, and strong winds today, the ground is finally dry out. I wore shorts to work for the first time since winter. Supposed fine all weekend.

Sent from my motorola edge 20 fusion using Tapatalk
 
8 day's straight of rain and wind

So over it! I'm losing jobs because I can't get a break from the rain, there's plenty to do but everything is just so wet. It's easily the worst spring on record in terms of my business.
 
So over it! I'm losing jobs because I can't get a break from the rain, there's plenty to do but everything is just so wet. It's easily the worst spring on record in terms of my business.

Yeah i hear you it's giving me the shits our lawn is about 7 inches high and the ride on broke today as i was warming it up. (electrical problems) :mad::mad::mad::mad:
 
So over it! I'm losing jobs because I can't get a break from the rain, there's plenty to do but everything is just so wet. It's easily the worst spring on record in terms of my business.
Deyon...place your hands on one of the cabinets, open the door and take a DEEEEP breathe...then chose a set of keys and get after it

Sent from my SM-G991U using Tapatalk
 
This video came up on my Youtube feed today, felt it was a great one to share..............

 
I thought you might like this. I had to find a "Secret Santa" present for my nephews father in-law. He's an old bloke who's mad about his Fords. I went looking for a book on Motorsport, he's an old towie who's worked at hundreds of races over the years, including multiple Bathursts. But I found this instead, you know I'm not into Fords, but there's a lot of really good stuff in there.
72c4bf27953a3951990023c8daf831b2.jpg
9615225a2e3468c41fad71205939cb65.jpg


Sent from my motorola edge 20 fusion using Tapatalk
 
I thought you might like this. I had to find a "Secret Santa" present for my nephews father in-law. He's an old bloke who's mad about his Fords. I went looking for a book on Motorsport, he's an old towie who's worked at hundreds of races over the years, including multiple Bathursts. But I found this instead, you know I'm not into Fords, but there's a lot of really good stuff in there.
72c4bf27953a3951990023c8daf831b2.jpg
9615225a2e3468c41fad71205939cb65.jpg


Sent from my motorola edge 20 fusion using Tapatalk

Nice! I have that book as well and it's a great read.

I started to lose interest in reading about new cars a few years ago, mainly because of the same-same effect. I do however like reading about the behind-the-scenes stuff, which is where this book comes into the picture.

What I found interesting was the amount of internal Ford self-sabotage that went on over the years in regard to Ford Australia. You would think Ford as a global entity would want each and every offshoot of the company to thrive and meet their full potential. But there were far too many times over the years where Ford US management attempted to make decisions about a market they had no knowledge of. Be that insisting of a particular styling direction (AU Falcon), forcing the local team to sell inappropriate models (Taurus), not listening to the needs of local engineers (XK Falcon) or simply putting the stop to any thought of a viable export program so that other countries could buy Aussie made Falcon's, Falcon Utes and Territory's.

It's so disappointing and was one of the many cuts that contributed to the death of Ford manufacturing in Australia, and the wider car making industry in this country.
 
This is the team that built handmade 'Maimi' V8 engines that were fitted to Falcon's from mid 2010 to mid 2016.



The engine in my XR8 was made by Stevie Voice, first on the right wearing a beanie. Each engine was engraved with the initials of the person who assembled it. I managed to thank this gentleman via a forum several years ago, it sure is a magnificent machine.



The "GEP" letters denote Geelong-Engine-Plant and the EA letters indicate Australia in the Ford universe.
 
Just stumbled across this video again from way back in 2001, showing the process in which Ford (Tickford) went about hand building stroked 5.6 liter Windsor V8's, as fitted to my T3 TS50 -






The hot camshaft they used made the whole car shake as the engine rocked against the mounts, and the fuel economy was hilariously terrible to the point where you could watch the fuel gauge dropping. But that was all part of the charm, an engine that made ALL the right noises, noises that a modern V8 would struggle to match.
 
Old vs New, the 1971 XY Falcon GTHO Phase III and 2014 FPV GT-F..................


The GTHO Phase III with its 351 Cleveland was once the fastest four-door sedan in the world.

The GT-F was the last Falcon GT made, and also the most powerful Falcon ever.
 
I may have been a Holden man, but those two are still cool. But they both need attention, the GT-F needs a good polish, especially on the shiny black trim on the front bumper, but what really surprised me was the water spots on the gloss back on the hood of the old GT.

Sent from my motorola edge 20 fusion using Tapatalk
 
I may have been a Holden man, but those two are still cool. But they both need attention, the GT-F needs a good polish, especially on the shiny black trim on the front bumper, but what really surprised me was the water spots on the gloss back on the hood of the old GT.

Sent from my motorola edge 20 fusion using Tapatalk

Yeah, I noticed the water spots on the XY too, along with degrading side stripes. Clearly its a driver as opposed to a museum piece.

That blue GT-F did the press fleet tour and was flogged into the ground, from memory it was build 014.
 
The vast majority of Falcon's (and Holdens for that matter) were fitted with 6 cylinder engines. And while that will be a story for later on, the V8 was always the hero of the range.

The high-powered V8 Falcon’s, again much like their cross town rival Holden, were Australia’s muscle cars. We did not get Mustang’s, Camaro’s or Challenger’s in Australia, but we did have fast sedans, wagons and Utes. Indirectly, the big performance Falcon’s were replaced by imported Mustangs, the first time they had been made at the Flat Rock factory in right-hand-drive.

The last V8 powered Falcon’s were just a little special though. These Coyote based 5.0 V8's were fitted to Falcon's from 2010 to 2016. They were codenamed Miami and locally assembled by hand at the Geelong engine plant, where the engine builder would stamp his initials under the supercharger snout. These Miami V8's were the first Ford in the world to have a factory fitted supercharged Coyote.



These engines were an amalgamation of parts, so there are no direct equivalents within the Ford world. As mentioned earlier, these engines were locally assembled in Australia rather than being crate engines like GM-Holden used in the Commodore (Chevy SS) (LS3's). Most components like the block and heads were imported. The Miami V8 had a locally designed intake manifold to support a Harrop HTV 1900 with Eaton Twin Vortices Series rotors that were originally developed for Jaguar. They used the Boss 302 rotating assembly and locally designed exhaust headers. Unlike the Coyote, these engines only used VCT on the intake cams. Once assembeld at either FPV or at the Geelong engine plant, they were crated over to the assembly plant in Broadmedows on the outskirts of Melbourne.















The huge open cold air intake was standard to introduce some induction note to the soundtrack.



While a Coyote is all about top end power, these engines hammer from idle to redline, which is set at 6250 rpm. The consequence of such grunt is hellacious fuel consumption! And that little number is liters per 100km.........11.5 mpg. :laughing:



The initial power outputs of these engines in 2010 were heavily restricted -

Falcon GS with the Boss 315 - 315 kw / 422 hp and 545 Nm / 402 ft-lb
Falcon GT with the Boss 335 - 335 kW / 449 hp and 570 Nm / 420 ft-lb

Some of the power restriction was down to saving room for future models, the throttle on these engines, especially the Boss 315, was restricted to open up to only about 70%. And because these engines were not fitted with an intercooler, although the manifold was designed for one, the tune of the engine had to take thermal management into consideration. There were also structural concerns with the Falcon's firewall and it's ability to take more power and torque. This meant upgrades were needed and therefore another round of crash tests, a process that Ford did not want to invest in at the time.

It wasn't until customers started putting these cars onto dyno's and the stated power outputs were being made at the rear wheels! that people started to question the quoted power outputs. It took a few years for the real story on power outputs to come to light. And it comes back to those thermal management issues.

On a cool day, these engines would over-boost up to 500 hp. When the sensors detected higher engine bay temps, the PCM would pull the boost back. Due to rules surrounding how power outputs are quoted, despite having the ability to make 500 hp, the 449 hp was the least it would make and therefore the number that had to be quoted/advertised.

Later versions of the Miami V8 appeared in the Falcon GT-F and Falcon XR8 Sprint as swansongs to the Falcon nameplate.

Falcon GT-F with the Boss 351 - 351 kw / 471 hp and 570 Nm / 420 ft-lb
Falcon XR8 Sprint with the Boss 345 - 345 kw / 463 hp and 575 Nm/ 420 ft-lb

These versions had more sophisticated thermal management via boost control per gear. On over-boost, the Boss 351 would make 420 kw / 563 hp and the Boss 345 would make 400 kw / 536 hp. Again, Ford was obliged to quote the lowest possible figure. A Falcon GT-F had the potential to do 0-100 / 0-62 in just on 4.5 seconds.





My XR8 is fitted with the Boss 335 version. You can certainly feel the power management in effect on a hot summers day, the car feels a touch neutered. On a cool Autumns day however, the thing is a wild ride with relentless torque. The Miami V8 is also butter smooth. Even with 275 wide tires on the back, these cars were almost like unguided missiles, they really struggle with power down and because the engine was tall and wide, they are somewhat nose heavy. As a long distance cruiser with the ability to easily overtake, they were in their element. And when driven within their abilities, they are fast, stable and enjoyable to drive with enthusiasm. Mine has a ZF 6 speed auto, I love the snap/crack they engineered into the upshift spark-cut, VERY addictive.



It's the noise that makes me smile the most though -

https://www.youtube.com/watch?v=qTq1yIOfVK4
https://www.youtube.com/watch?v=ZEJzrKHbaAQ
https://www.youtube.com/watch?v=ztB-CMfDD9k
https://www.youtube.com/watch?v=SVIHlJ0of6o
https://www.youtube.com/watch?v=MCDvKGkqEoY

I love this hot lap around Bathurst from the GT 335 launch back in 2010 -

https://www.youtube.com/watch?v=CBaj5uhB_XE

While my Mustang shouts about it's performance, I love how the XR8 is a bit of sleeper, especially in grandpa burgundy. :D

Another video I stumbled across again. This documents the hand assembly of the Coyote-based "Miami" V8's -


The facility shown in the video was the FPV engine assembly, which was located across the road to the main Ford assembly plant. When FPV was wound up in 2012, the tooling for this engine were shifted to the Ford engine plant in Geelong. That plant was solely making 6-cylinder engines since the mid 80's, but also manufactured Cleveland V8's from the early 70's to the mid 80's for fitment to Falcon's and locally assembled F-Series models.



GEP was casting plant at its core, so the 6-cylinder engines produced there were the most Australian of all engines during that era. On the other hand, the Miami V8 was assembled using US block and head castings, combined Australian components like the inlet and exhaust manifolds, the supercharger ect.

GM Holden imported all their V8's as crate engines, the V6's were assembled here, from memory, using imported castings. GM-H actually benefited from that because most, if not all, powertrain upgrades piggybacked the wider GM parts bin. Ford on the other hand had specific Australia-only engines that were not supported anywhere else, meaning any upgrades with minor.
 
The vastly inferior Australian version of Top Gear with a David vs Goliath comparison, The Falcon GT with the supercharged Miami vs Renault Clio RS...................


It's very unlikely anyone considered cross-shopping these two back then. One is a hard-edged hot hatch with a high revving naturally aspirated 4-cylinder engine, the other a grand touring sedan that's at home on a highway or big flowing track.
 
Definitely an apples to oranges comparison. The guys are fun, though. Vastly better than the annoying, pompous English crew.

The question is: Which would I rather live with for a daily driver? For me, the Falcon. I don't drive on race tracks, and I don't care about using a few dollars more in fuel.

Thanks.
 
So much history in this thread, such a pity the Gov. decided to shut both Holden and Ford factories.
 
So much history in this thread, such a pity the Gov. decided to shut both Holden and Ford factories.
In the case of Holden, the government was still supporting them when GM had already decided to shut down the Holden brand. Maybe the government got some inside info about that, and that is why they gave up. GM could find themselves in some legal trouble, one of the former dealerships who is suing them has just been granted access to their corporate strategies regarding Holden's future. This could get expensive.

https://www.drive.com.au/news/holden-dealer-wins-court-bid-for-gm-strategy-docs/



Sent from my motorola edge 20 fusion using Tapatalk
 
Back
Top