Which AIO

F

former86camaro

New member
Joined
Mar 28, 2006
Messages
109
Reaction score
0
It has been a while, a year and a half to be exact and I am now back in Florida and back in detailing. I have used Optima Poli Seal, XMT 360 , Poor Boys Polish with Sealant and Klasse. For my work Optima Poli Seal has worked the best, but I see D151 for a good price and I see Dodo Juice AIO and I am torn with that and also Poor Boys.

The AIO can't stain plastic
Must do minor imperfection removal
Easy on and Off
Be able to be bought in Volume or sample size...

Also I am looking for a good plastic polish since I am doing a lot of head lights for fiends these days.

Suggestions.. Optima has been my go to, but I see some new things and like to try it all...
 
FWIW,
I'd take a hard look at the Meguire's D 301 Finishing wax. Meguiars DA Microfiber Finishing Wax, car wax, final wax
It's part of the new Meguire's Microfiber finishing system but I think this will out perform many of the other AIO's out there and there have been some exceptional results using it with foam finishing pads. Here is an example http://www.autogeekonline.net/forum/show-n-shine/39472-good-ol-boy-s-work-truck.html
I have not used it in this way yet but plan to. It does work awesome with the MF system but I believe it's AIO 1step ability is limited by the MF pads. It's very close in price with the D-151 and I think it will out perform it by quite a bit. I'm going to try it with the LC Hydro tech Cyan and Tangerine pads. They finish down very nice and I think 301 and HT pads will make an awesome combo ....... At least I have my fingers crossed.Im the MAN
 
Last edited:
I would go with D151. It's an AIO and it corrects pretty well especially compared to other AIOs.
 
I would use XMT 360 or 151. Both offer decent correction along with protection. 151 is cheap and bought by the gallon. As far as staing trim, a little tape will elminate this with any product you use.
 
D151. poli seal is good but doesn't have much cut to it. I have both and they each have their place but I use d151 the most. It does stain trim but I always tape before hand.ounce of prevention as they say. I dont know who they is but I know they say it.
 
Actually, after taking a suggestion from Chris @ Optimum, I tried Poli-Seal mixed with Polish II (70/30 blend) and it cut very well. Follow up with an Optimum Car Wax wipe down and your good to go. :)


Sent using Tapatalk
 
Buckskincolt said:
FWIW,
I'd take a hard look at the Meguire's D 301 Finishing wax. Meguiars DA Microfiber Finishing Wax, car wax, final wax
It's part of the new Meguire's Microfiber finishing system but I think this will out perform many of the other AIO's out there and there have been some exceptional results using it with foam finishing pads. Here is an example http://www.autogeekonline.net/forum/show-n-shine/39472-good-ol-boy-s-work-truck.html
I have not used it in this way yet but plan to. It does work awesome with the MF system but I believe it's AIO 1step ability is limited by the MF pads. It's very close in price with the D-151 and I think it will out perform it by quite a bit. I'm going to try it with the LC Hydro tech Cyan and Tangerine pads. They finish down very nice and I think 301 and HT pads will make an awesome combo ....... At least I have my fingers crossed.Im the MAN
Click to expand...

07 z-oh-6 said:
He actually used D300 which is not an AIO. :xyxthumbs:
Click to expand...

Buckskincolt said:
I stand corrected sir!:bowdown:
Click to expand...

Thanks guys...

I will be trying the D300 in a custom blend trying to get an AIO type of product just for testing purposes......

I Have custom mixed Megs UC and KAIO and that worked well but was a PITA to remove I think it was some sort of chemical mix issue... IDK... I like to play with my products...

I have used D151 a few times but didn't like how it finished down... Just personal opinion here...
 
rwright said:
Actually, after taking a suggestion from Chris @ Optimum, I tried Poli-Seal mixed with Polish II (70/30 blend) and it cut very well. Follow up with an Optimum Car Wax wipe down and your good to go. :)


Sent using Tapatalk
Click to expand...
Would this be the new version polish II mixed with poli-seal?
 
Either will work well to add cut to PS regardless of whether it's the newest Polish II


---
- Sent from my ViP4 viaTapatalk
 
meg D151, FK 215 and Optimum Poli Seal. D151 would give the best correction
 
You need to lighten up on your last two passes with D151. Most people here will say it finishes very nicely.
 
You must log in or register to reply here.
Back
Top