Anyone use MF detergent and an HE washer to wash their towels?

WRAPT C5Z06

New member
Joined
Nov 12, 2009
Messages
12,615
Reaction score
0
HE washers work in a completely different way. Add the detergent first, then run the cycle? It seems as thought the MF detergent is too thin and will be lost in the holes in the washer??
 
Yes. The MF detergent is low sudsing. I also add a cup of white vinegar to the wash as well
 
You can always add it with some water. I usually use 1 oz of MF wash and fill up with water in the 3 oz cup and pour it in.
 
wow on this appearing in FB feed that teeters on the line of absolutely ADD ridiculousness. Wash the towels with soap and stop focusing so hard on granules of detergent and the catastrophic effects on microfiber integrity. Dry them, move on.
 
wow on this appearing in FB feed that teeters on the line of absolutely ADD ridiculousness. Wash the towels with soap and stop focusing so hard on granules of detergent and the catastrophic effects on microfiber integrity. Dry them, move on.
Whoa, whoa, slow down kid! I like using MF detergent and I feel the viscosity of it might be too thin to use with an HE washer to be effective. If I used regular laundry detergent with an HE washer, or, the MF cleaner with a traditional washer, this wouldn't be an issue. I might have to resort to one of these, but I was just curious. Relax!
 
Whoa, whoa, slow down kid! I like using MF detergent and I feel the viscosity of it might be too thin to use with an HE washer to be effective. If I used regular laundry detergent with an HE washer, or, the MF cleaner with a traditional washer, this wouldn't be an issue. I might have to resort to one of these, but I was just curious. Relax!

I'm sorry, just saw a large chunk of AGO threads flood my feed (ongoing irritant), and was like why are people over analyzing about detergents? The last OCD one I saw a few weeks ago was a poor soul worried over rinse bucket liquid levels. LOL As for MF towels, I just wash mine in an HE washer with HE Tide and I'm done. Sometimes twice if they still feel a bit waxy. They come out just fine.
 
Have used MF detergent with and without vinegar, works like a charm in my HE washer.
I dry the MF's in the dryer low heat, no dryer sheets.
 
I'm sorry, just saw a large chunk of AGO threads flood my feed (ongoing irritant), and was like why are people over analyzing about detergents? The last OCD one I saw a few weeks ago was a poor soul worried over rinse bucket liquid levels. LOL As for MF towels, I just wash mine in an HE washer with HE Tide and I'm done. Sometimes twice if they still feel a bit waxy. They come out just fine.
No worries. I'm just trying to figure out if using MF detergent is effective in an HE washer. Nothing more, nothing less. To me, it seems like the lack of sudsing with MF detergent wouldn't be "activated" in an HE washer. The thicker traditional detergents(tide, etc..) would make a lot more sense. I'm going to pick up some ALL Free & Clear and be done with it. :dblthumb2:
 
Microrestore, Blackfire, and DP all work fine in a He washer. They are all low sudsing and you just need to adjust the amount to get the job done.

As usual with any He washer, the washer controls the water amount by load so add a lot of soap may lead to residual soap in the towels so may need to add a second rinse and use vinegar.
 
I've used the pinnacle mf cleaner with an he washer with no problems. Just use a second rinse to make sure there is no residue left.
 
HE washers work in a completely different way. Add the detergent first, then run the cycle? It seems as thought the MF detergent is too thin and will be lost in the holes in the washer??

No worries. I'm just trying to figure out if using MF detergent is effective in an HE washer. Nothing more, nothing less. To me, it seems like the lack of sudsing with MF detergent wouldn't be "activated" in an HE washer. The thicker traditional detergents(tide, etc..) would make a lot more sense. I'm going to pick up some ALL Free & Clear and be done with it. :dblthumb2:

Wow, you really lost me here. Lost in the holes? The holes are in the liner, not the actual water vessel...if the detergent could get lost in the holes, the water would too.

Sudsing is not what does the cleaning, it's a byproduct of how the product is formulated. As long as you have water in the machine, the detergent will be "activated". The reason you need to use low-sudsing detergents in front-load machines has to do with with the tumbling action which causes more sudsing than a top loader.
 
MF cleaner is another one of the great scams of this decade. Just use a little regular detergent and you will be fine. Stop overthinking this.
 
Just use a second rinse to make sure there is no residue left.

A dermatologist once told me that you should always rinse twice, if you have minor skin irritations, because residual soap is always left behind after a single rinsing. This residual gets less and less with each rinse. However, the dermatologist did mention that usually two rinse cycles are sufficient for most people with minor allergies, and that the amount of items in the washer can affect the rinse as well.

In other words, a half load of towels will rinse better with a large cycle versus a medium cycle. Common sense really dictates that less wash items and more water equals better rinsing.

The reason you need to use low-sudsing detergents in front-load machines has to do with with the tumbling action which causes more sudsing than a top loader.

Exactly! However, HE washers may indeed be more efficient at rinsing, idk. You'd probably just have to experiment to see what works best. I'm always cautious and rinse twice.

For detailing towels this is what I do. I always rinse twice and I'd still do it even if I had a HE washer. I do it as a precaution now, and would then also.

I think Mike Phillips uses Tide free and clear, or perhaps regular Tide if I recall correctly. I use All brand...called All Free and Clear and I rinse twice...with vinegar in the rinse cycle...about 8 ounces in a large load rinse cycle. Never had an issue.
 
wow on this appearing in FB feed that teeters on the line of absolutely ADD ridiculousness. Wash the towels with soap and stop focusing so hard on granules of detergent and the catastrophic effects on microfiber integrity. Dry them, move on.

I'm sorry, just saw a large chunk of AGO threads flood my feed (ongoing irritant), and was like why are people over analyzing about detergents? The last OCD one I saw a few weeks ago was a poor soul worried over rinse bucket liquid levels. LOL As for MF towels, I just wash mine in an HE washer with HE Tide and I'm done. Sometimes twice if they still feel a bit waxy. They come out just fine.


People can talk about anything they like on the forums. If you have nothing useful to add don't say anything!
 
I think Mike Phillips uses Tide free and clear, or perhaps regular Tide if I recall correctly. I use All brand...called All Free and Clear and I rinse twice...with vinegar in the rinse cycle...about 8 ounces in a large load rinse cycle. Never had an issue.

Enough said. If Mike P. uses Tide free and clear, it should be good enough for the rest of you. Stop overthinking this and save yourself some money.
 
I have a HE washing machine. I use half a cup of all- free and clear. Then I pour around 2 oz of microfiber detergent directly on the towels. Has been working well I've probably done 10-12 loads with this process.


Sent from my iPhone 4S using Tapatalk
 
You're over thinking this, just follow the directions and I'm sure you'll be fine if its a quality product :xyxthumbs:
 
Enough said. If Mike P. uses Tide free and clear, it should be good enough for the rest of you. Stop overthinking this and save yourself some money.

Mike really uses free and clear?


Sent from my iPhone using AG Online
 
Back
Top