Shelby GT500

Ron Atchison

New member
Joined
May 2, 2011
Messages
1,034
Reaction score
0
This is part 1 part 2 is here http://www.autogeekonline.net/forum/show-n-shine/57381-shelby-gt500.html for what ever reason the post got split. Anyway this is Shelby I did last week in preparation for winter storage. Overall the car was in very good condition with just a few rids and normal use swirls. The interior was also in pretty good shape.
Products used
Interior:
Auto Finesse Crystal glass cleaner (pricey but IMO the best there is)
Chemical Guys WW Window Towel
Lucas Interior Detailer
Optimum Power Clean
Poor Boys Work MF Towels
Chemical Guys Leather Conditioner
Migliore Brilliant Dressing
Zep Carpet Cleaner
Bissell LGM Pro Heat
Various Brushes

Exterior:
Power Washer
Foam Cannon
Flex 3401
GG 6
Buff & shine 6” Green & Black
LC Black 5.5 Flat Pads
Chemical Guys Citrus Wash & Gloss & Dawn Mix
Mothers® Wheel & Tire Cleaner
Optimum Opti-Seal
303 High Tech Fabric Guard 303 High Tech Fabric Guard 3 High Tech Fabric Guard
Ultima Elastrofoam Paint Cleaning System
Ultima Tire & Trim Guard Plus
Sonus SFX -1 Restore Polish
Sonus SFX -2 Enhance Polish
SONUS SFX-3 Final Finish Polish
BLACKFIRE Wet Diamond All Finish Paint Protection
BLACKFIRE Midnight Sun Ivory Carnauba Paste
Chemical Guys Hybrid V7
Migliore Bella Lustra Tire Glaze
Cobra WW Towels
Chemical Guys Big Monster 550 Towels
Chemical Guys WW Window Towel
Zep Citrus
Sonus Motor Kote
P21S Polishing Soap
Detailer’s Pro Quick Wax
Detailer’s Pro Trim Detailer
Optimum MF Cutting Pad
3M Tape
3M Painters Window Plastic
Various Brushes and MF Wash Mitt
That’s a lot of stuff for a car that was in pretty good shape to start with. J


Exterior of car as it was delivered.
100_4839.jpg

100_4837.jpg

100_4836.jpg

100_4835.jpg

100_4834.jpg

100_4833.jpg

100_4832.jpg

100_4831.jpg

I started off with the wheels. How many brushes does it take to clean wheels??
This many
100_4858.jpg

100_4838.jpg

100_4830.jpg

100_4841.jpg

Handled
100_4911.jpg




This is part 2 part 1 is here. http://www.autogeekonline.net/forum/show-n-shine/57380-shelby-gt500.html for what ever reason I can edit the post but can't delete it and start over anyway....
100_4846.jpg

100_4845.jpg

100_4868.jpg

Paint protected from over spray and ready for the motor coat.
100_4867.jpg

100_4905.jpg

100_4906.jpg

100_4907.jpg

100_4904.jpg


All taped up for polishing.
100_4903.jpg

100_4871.jpg

100_4869.jpg

100_4870.jpg

Flex 3401
Sonus Restore and MF pad was used for removing the 3000 grit sanding scratches. Enhance was used with a green pad and the finish was used with a black pad.
 
Last edited:
GG 6
LC black flat pad was used to apply the BFWD sealant. The MS was applied by hand.
100_4938.jpg

The final wipe was with CG V7. All trim was dressed with either Details Pro Trim Detailer or Ultima Tire & Trim Guard Plus. The door jams were done with Details Pro spray wax.
Reverse taping to keep the trim dressing off of the paint.
100_4944.jpg

100_4945.jpg

100_4946.jpg

100_4923.jpg


With the exterior done on to the interior.
100_4849.jpg

100_4850.jpg

100_4853.jpg

100_4964.jpg

100_4965.jpg

100_4967.jpg

100_4968.jpg

100_4969.jpg

100_4970.jpg

100_4971.jpg



Finished pics day 2
100_4947.jpg

100_4948.jpg

100_4950.jpg

100_4951.jpg

100_4954.jpg

100_4955.jpg

100_4937.jpg

Questions comments welcome. Thanks for looking.
 
Outstanding work on the GT 500. Also liked that you show the product used on each step.I find that very helpful thanks for sharing .
 
Nice work man, how is that leather conditioner by CG?
 
I noticed the typical rust on the brakes.

Do you take it around the block and then re-wipe the wheels down?
 
Great work you achieved on the mustang. I enjoyed reading the write up along with the pictures, very well executed. Thanks for sharing and posting.
 
One of the coolest cars on the market today IMHO! Great job, looks sharp!
 
Man you guys gave an old one new life but also showed me that there were a few questions that I never answered. So let me start off by apologizing to those people.

Outstanding work on the GT 500. Also liked that you show the product used on each step.I find that very helpful thanks for sharing .

Thank you

Nice writeup! Good job on the Shelby too! Thanks!

Thank you too!

Dude that is some skills u got there in taping lol....

After a few rolls you get it down.

Nice work man, how is that leather conditioner by CG?

I like it, it has a nice new leather smell to it almost as good as a new car smells.

Very nice thanks for sharing

Thanks

Spectacular detail :props:

Thanks Vegas

I noticed the typical rust on the brakes.

Do you take it around the block and then re-wipe the wheels down?

Normally yes but not on this one. I had to drive it about 30 miles to return it and wiped it down then.

Great job and excellent write up :dblthumb2:

Thanks

Great work you achieved on the mustang. I enjoyed reading the write up along with the pictures, very well executed. Thanks for sharing and posting.

Thank You

One of the coolest cars on the market today IMHO! Great job, looks sharp!

Thanks they are a blast to drive. Couldn't imagine the 600hp model.
 
I'm having trouble identifying the GP roadracer!?! I have a friend that races with the GPRU. Nice work btw :-)
 
I'm having trouble identifying the GP roadracer!?! I have a friend that races with the GPRU. Nice work btw :-)

Which one I have two. My avatar is Valentino Rossi and the one at the bottom is obviously Marco Simoncelli. Ironically they were best friends and both involved in the crash when Marco lost his life. An estimated 20,000 people attended his funeralhttp://en.wikipedia.org/####/Marco_Simoncelli#cite_note-39

yes sir you did a wonderfull jop :dblthumb2::dblthumb2:
Thank you.
 
Back
Top