Recent content by Valky

I could guarantee that gloss meter result is pretty ligit. Most of car care products manufacturing hate it because it could proved that the claimed of their wax, sealant and coating making car glossier a false claim. The glossiest paint is when it had been polished and wipe down, any coating...

You would not want to remove them by hand-period.

I had been using dozen of both pad, there is only one URO Fiber Shrink, and it’s compltely my false. I throw it to my washing machine together with microfiber towel, wash them by forgetting to open water valve, so machine wash them with very little water and high microfiber wash solution...

Re: NEX FLEX Cordless Polishers! 30-40 minutes and no information yet what speed to use within that range, and power dropping when battery in lower condition isn’t mention yet.

Go for MK2, it’s not make sense that 3401 would be more expensive than MK2. Also 3401 have much less correction ability unless you put quite a pressure on them, and it’s will wear you out pretty quick. Rupes on the other hand could stop spinning, but all you need to do is learning the trick...

He talking about opticoat not GlossCoat. Opticoat is expensive an only authorized installer can do them now. He just want a bit more protection.

Dr.G recommend to put Opti Seal over any of opticoat, there is an authorize installer specific product as well but for normal consumer go with Optiseal.

There are several methods 1.) it’s how you handle the machine, need familiarity with them 2.) 3 inches machine 3.) Using 8mm throw DA is easier

I usually use them on FG400 and SF3800, both cut and Gloss are phenomenal. If you need just only to polish small defect Yellow and your Jescar finishing polish will work perfect to creat deep wet. For AIO, Maroon will work very well, I try it with speed and get a “cheating” result on heavy to...

Jcat9, if you are interested in using Rupes pad but not thier liquid, you can go all the way with BnS URO-TEC line, it’s even better on durability and versatility with every brand of compound and Polish.

Fightnews, HDO foam pad cutting ability is very low, it’s just on par with orange or yellow CCS pad at most (which both have less or equal to URO-Tec Maroon at most). Their HDO microfiber cutting is great though. But if you want a foam cutting pad, you will never disappoint with BnS Uro-tec or...

I find Thin Pro to be too thin and having problem when you try to get to tight area, while low pro eventhough the foam also thin but the design that increasing backing allow you to get more angles to get into conclaves and tight area. I found Low Pro green to providing more cut and finishing...

From the tech spec which display that 21 and 15 have the same 15 mm stroke and same 5” backing plate showing me that Rupes actually not paying attention to details!!!

Uro-Tec pad is great but once you can get familiar with Low Pro, it would deliver you to next level of cutting power.

Rupes UHS, as one step polish with cutting rate at 8 out of 10 and finish so perfect, I never found any other 1 step compound to compete with them. It also a true Zero dust in any situation as well.