Search results

It saves you 2 steps, washing the car then while rinsing it seal the car paint . you can then dry the car with air blowing only since its great hydrophobic , so no need to touch the surface. Hydrofoam is pH neutral as well, not aggressive shampoo so can be used on waxed cars too. we think it...

The hard wiping the Flyby was because it cured fast on the glass. temps are high now, you need to work faster, no need cure time for Flyby30, apply on>>> wait max 30 sec. >> wipe off with MF.

Hi As mentioned here we did the UK version for cold weathers, under 20 deg . (68 F.) but yet it is possible to use at higher temp and humidity as well. you just need to wipe off right after applied, not to wait more then 30sec. so its basically wipe on wipe off procedure. use the big suede for...

White leather is more sensitive to UV light,we think that leather manufacturers use different type of clearcoating resins on them,very thin , some use more Anti UV protection and some dont, you see everything on that white , so if the leather use poor leather coat we suggest first to check our...

Hi, there will be no problem at all even with these holes, the coat is thin, flexible and even breathable over the leather surface. it dries almost instantly and doesnt get solid or crack. after applying , and minute after , if you see high spots just wipe them off gently with MF. driver seat i...

Cquartz classic flash slower at high temp , but you did right doing small sections, car looks great BTW.

Great work ,car looks stunning. make sure the customer maintain well his washing procedure, neat black in easy to get messed with.

Not sure what exactly you have done there,pictures would help, if surface still has these high spots i would advise to use our Spotless , its strong acid solution that i know can help you with the coating you have there. work it as water spot remover, spray over the defected area , agitate on...

A QD is mostly alcohol with polymer base material to make it shine and smooth , Eraser is mostly alcohol and water . if car is light dusted i would say its fine for removing it, but if the car is more heavy dusted i would suggest washing it with water+soap about cutting it, im not sure you...

No need anything after , just good shampoo cleaning as our Reset shampoo, for spots cleaning i would suggest simply the Eraser spray, spray and wipe , good for removing light dust, birds drop (clean them while its fresh) or insects marks.

Sonax as much as i know is based on acid thioglycolic , its little different from our tech, IronX attack stronger iron dust , the color change means reaction with irons and metals but how deep or strong it react is the question. there is no poblem with the rotor discs, water wash the melting...

As few guys mentioned here, PERL is water based, its a mixture of silicons and acrylate resin , NO SOLVENTS inside since solvents ,which used mostly in rubber dressing, damage in the long run the tire rubber and attract more dust to it, its more durable yes but slowly etching the rubber surface...

While its still fresh you can remove the streaks with damp mf , buffing them. make sure surface is not hot or under the sun while spraying. higher dilution ratio is possible too. like few guys mentioned here.

Wait few days until the clearcoat will be totally dry and you can apply easy the DLUX , eraser wont do any damage to your new clearcoat. once Dlux is well dry you can wash them anyway you like, though not necessary harsh wheel cleaner since the Dlux will protect your wheel and repel easy the...

Reload is a sealant , stand alone product, its used inorganic materials that attract much less dust then oily based waxes. we advise using this after cquk applied to protect it from water spotting at the first 7 days , it will not interfere the coating, only become sacrificial topper if its...

There is no problem if ironX dry over the surface for short time, just make sure to rinse or wash well after. we say that as a precaution measure . the idea is not to leave it for very long time over the surface. like any chemical which you wont leave to dry for long time.

We give the customers the option to choose!, on wet car : spray on - rinse off , OR on dry surface : spray on -wipe off , SAME PRODUCT!! we try to bring new ideas that save money for customers, not make products with individual target use. versatile and flexibility. :xyxthumbs:

Its our new product, coming soon to Autogeek as well, RTU formula of Hydro2 which as you said can be used on wet or dry surface, "spray on-rinse off" or "spray on-wipe off". the left side which sheet slower is because the panel we show here was soaked with water sheet standing,diluted even...

How long passed after Reload was done? if you have strong APC cleaner you can use it over the car surface , after that you can apply CQUK over the reload , it will be fine. CQUK can be applied on glass surface as well, but wont last so long as flyby Forte would.

Thank you for the follow up, i wonder how it will look after you washed it. using Reset shampoo will revive the beading effect btw.