SYMAWD New member Joined Feb 10, 2013 Messages 1,667 Reaction score 0 Mar 11, 2013 #1 Today I detailed a 2011 VW Routan (6 hours total). I did everything but paint correction. I will list the AutoGeek products I used as I go along. If you care about what else I used, PM me and I'll tell you. First up, less assess the "damage".
Today I detailed a 2011 VW Routan (6 hours total). I did everything but paint correction. I will list the AutoGeek products I used as I go along. If you care about what else I used, PM me and I'll tell you. First up, less assess the "damage".
SYMAWD New member Joined Feb 10, 2013 Messages 1,667 Reaction score 0 Mar 11, 2013 Thread starter #2 Here is the plasti-dipped front end that protected the car this winter. Starting to peel All gone Driver's side floor mat All 4 cleaned (CG's NONSEnSE 20:1) Cleaning the leather (OTC product) Camera didn't pick up the 50/50 too well All seats got the same treatment and then were conditioned. Arm rest before After Bye Bye stain
Here is the plasti-dipped front end that protected the car this winter. Starting to peel All gone Driver's side floor mat All 4 cleaned (CG's NONSEnSE 20:1) Cleaning the leather (OTC product) Camera didn't pick up the 50/50 too well All seats got the same treatment and then were conditioned. Arm rest before After Bye Bye stain
SYMAWD New member Joined Feb 10, 2013 Messages 1,667 Reaction score 0 Mar 11, 2013 Thread starter #3 Dead pedal Arm Rest 50/50 (the dark ring in the middle is where the tape was) Front wheel before Medium wheel woolie Don't know what this is but the wheel cleaner didn't do a thing about it All done Chemical Guy's All Clean + 10:1 Wheel well after Now for the extra dirty back wheels: Unfortunately, even after 3 applications and agitations, this was left over.
Dead pedal Arm Rest 50/50 (the dark ring in the middle is where the tape was) Front wheel before Medium wheel woolie Don't know what this is but the wheel cleaner didn't do a thing about it All done Chemical Guy's All Clean + 10:1 Wheel well after Now for the extra dirty back wheels: Unfortunately, even after 3 applications and agitations, this was left over.
SYMAWD New member Joined Feb 10, 2013 Messages 1,667 Reaction score 0 Mar 11, 2013 Thread starter #4 All Clean + on foam setting Strip 2 bucket wash (car shampoo + All Clean +) Drying time (CG drying towel) After the wash Just the hood (CG's fine grade clay bar + ONR at lube dilution) Before clay, I used IronX soap gel at 4:1 and it worked well on the paint. Paint then got detail spray and a sealant. Time for dressing Faded emblem Dressed emblem Faded Dressed (I leveled it out with a MF after) Engine after Another dressing 50/50s My favorite OTC dressing Afters Hope you guys enjoyed. Last edited: Mar 11, 2013
All Clean + on foam setting Strip 2 bucket wash (car shampoo + All Clean +) Drying time (CG drying towel) After the wash Just the hood (CG's fine grade clay bar + ONR at lube dilution) Before clay, I used IronX soap gel at 4:1 and it worked well on the paint. Paint then got detail spray and a sealant. Time for dressing Faded emblem Dressed emblem Faded Dressed (I leveled it out with a MF after) Engine after Another dressing 50/50s My favorite OTC dressing Afters Hope you guys enjoyed.
JSou New member Joined Dec 17, 2012 Messages 1,635 Reaction score 0 Mar 11, 2013 #5 Nice write-up and great work.
WAXOFF New member Joined Jun 17, 2012 Messages 1,283 Reaction score 0 Mar 11, 2013 #7 I work at a VW dealer. They can really hog them up. I've seen them come in that you didn't want to touch anything.
I work at a VW dealer. They can really hog them up. I've seen them come in that you didn't want to touch anything.
K killrflake New member Joined Jan 25, 2007 Messages 1,153 Reaction score 0 Mar 11, 2013 #8 Nicely done.