2018 Jeep Trackhawk - Saskatchewan, Canada - CQuartz Professional

TylerHoffarth

TylerHoffarth

New member
Joined
Feb 26, 2013
Messages
74
Reaction score
0
I was honored to have a new Jeep Trackhawk (6.2l S/C, 707hp) come in for a New Vehicle CQuartz Professional Service.


Here is a list of the services performed:

  • Complete Foam Rinse/Hand Wash
  • IronX, TarX, ClayBar Decon
  • Paint Correction
  • Paint Refinement w/ CarPro Essence
  • CQuartz Professional on all painted surfaces
  • FlyByForte on Windshield
  • Reload on all Glass
  • Hydro2 on Wheels (after a full decon)
  • CQuartz Leather application
  • Gtechniq Fabric Guard Application


Without going into a long list, I primarily use Rupes machines, Meguiars/Lake Country MF cutting pads, Rupes Yellow Polishing pads, and CarPro Gloss pads for finishing. Compound used was FG400, followed by CarPro Essence. Other areas where required had EX-04/06.


Below we see the vehicle in it's condition upon delivery. Saskatchewan, Canada can be a dirty place to drive!
I also threw in some wash photos.








Here are some photos of the polishing process & results. It was unfortunate to see such extensive damage on a vehicle with less than 950km on the odometer!










And finally, the finished photos:












Thank you for viewing! I appreciate any feedback :)


If you are interested in my full write-up, I have that available on my website as linked below:


www.unleashedautocare.com/jeep-trackhawk
 
Great finish, sweet ride. Checked out your website. The third to last picture with the tiny sun in the paint is NICE!
 
Nice job. Looks like you are washing indoors, must be nice.

Seems like it would not be easy to get folks to get their cars detailed during the winter.
 
Great job on the car. I'm actually shocked that in Saskatchewan he doesn't have winters on.
 
More pics of that interior!

Sent from my SM-G950U using Tapatalk
 
Klasse Act said:
More pics of that interior!

Sent from my SM-G950U using Tapatalk
Click to expand...
I'll try to find some!

Thanks everyone for the compliments!! It was a fantastic vehicle to work on, I'm glad you are all enjoying my short write up and photos

Sent from my SM-G950W using Tapatalk
 
Well done! Nice work, you made that special Jeep look how it should have from the factory...only better and better protected. Nice!
 
Found some additional interior shots as requested!
4188dbec5da458fb5b94cd0bab0bfdb0.jpg
3c6e52300bed962f685b63707236692b.jpg
163729dea01dc71a7b3b4b18641fd551.jpg
a5cecbdfffbcef7575f79798e9a18c00.jpg


Sent from my SM-G950W using Tapatalk
 
fightnews said:
Nice, how does a 2018 get that many swirls?
Click to expand...
That sure is the question. The owner said he ensured the dealer only rinsed the vehicle down upon delivery; my guess is they had to remove some protective film from the hood and probably rubbed their paints on the front bumper doing so.

The rest of it, I'm unsure but it was sad to see on something that had so little mileage on it. She's looking good now, though!

Sent from my SM-G950W using Tapatalk
 
You must log in or register to reply here.
Back
Top