RaskyR1
New member
- Apr 14, 2008
- 3,733
- 0
New Alfa 4C in for a 2-step paint correction and long term coating. The owner of this car actually contacted me in May of 2014 and just recently (finally) after waiting a very long time, took delivery of his new baby. He had researched ahead of time and was prepared for the paint to be in the condition it was, and as you'll see from the before pics, it definitely needed a little love. I'd say I achieved 95% correction or better but there were few light scratches remaining here and there...overall a drastic improvement though.
Process:
Wash - Traditional Wash with Megs Hyper Wash
Wheels - Sonax Wheel Cleaner Plus & various brushes.
Tires - Cleaned with Megs D143 and Tuf-Shine brush. Dressed with Megs Hyper Dressing 3:1
Paint Prep - Nanos Skin Towel and Glide as lube
Paint Correction - Groit's Fast Correct Cream on the G21 with Griot's Fast MF pads followed by Correcting Cream on yellow BOSS pads. Tight areas done with G110v2 and Flex PE14.
Pre-Coating Prep - Eraser wipe down followed by IPA wipe down
Coating - 3 coats CQF, IR Cured
Exhaust - Optimum Metal Polish
Before pics



Compound burn on the door

Lots of sanding marks all over the car



Holograms too

More sanding marks

Compound residue in panel gap

Scuff/abrasion on rear bumper cover

Nasty sanding marks


Deep scatches



More sanding marks on the roof edge



BOSS doing work

Process:
Wash - Traditional Wash with Megs Hyper Wash
Wheels - Sonax Wheel Cleaner Plus & various brushes.
Tires - Cleaned with Megs D143 and Tuf-Shine brush. Dressed with Megs Hyper Dressing 3:1
Paint Prep - Nanos Skin Towel and Glide as lube
Paint Correction - Groit's Fast Correct Cream on the G21 with Griot's Fast MF pads followed by Correcting Cream on yellow BOSS pads. Tight areas done with G110v2 and Flex PE14.
Pre-Coating Prep - Eraser wipe down followed by IPA wipe down
Coating - 3 coats CQF, IR Cured
Exhaust - Optimum Metal Polish
Before pics



Compound burn on the door

Lots of sanding marks all over the car



Holograms too

More sanding marks

Compound residue in panel gap

Scuff/abrasion on rear bumper cover

Nasty sanding marks


Deep scatches



More sanding marks on the roof edge



BOSS doing work

