Claying headlights before polishing?

solodetailing said:
I guess my kit is an older one in the black bottle. My mistake.

Sent from my SM-G935U using Tapatalk
Click to expand...

No problem. I agree with you on the black bottle (headlight protectant). It was ok but not great.
 
Eldorado2k said:
Does anyone bother claying headlights before polishing them?

Also, does anyone have any experience with trying to restore the headlights on a Corvette like this?

f02692f23c0b5803106b4fba50ceeec3.jpg


How beast are those headlights to restore? Do you think sanding will be a must? Or are they cooperative by any chance?
Click to expand...

You may or may not need to sand those. My recommendation would be to mask the paint very good with multiple layers of masking tape and if you have any concerns I would just start out with a wool pad and a good compound spend some time compounding them by machine check the results if you are satisfied don't worry about sanding them. Then again some headlights require sanding to make them look close to perfect.


Sent from my iPhone using Autogeekonline mobile app
 
The Guz said:
No problem. I agree with you on the black bottle (headlight protectant). It was ok but not great.
Click to expand...

It wasn't "ok"... It was horrible. Meguiars has recently discontinued it. I'm surprised I haven't thrown this bottle away yet. Lol.

893674403465c65a97514620fbea46e9.jpg


EliteDetailing said:
You may or may not need to sand those. My recommendation would be to mask the paint very good with multiple layers of masking tape and if you have any concerns I would just start out with a wool pad and a good compound spend some time compounding them by machine check the results if you are satisfied don't worry about sanding them. Then again some headlights require sanding to make them look close to perfect.


Sent from my iPhone using Autogeekonline mobile app
Click to expand...

I masked off really good, trust me I wasn't about to screw up the paint on my neighbors Corvette by making a rookie mistake. :)

I started off by trying to compound using Mckee's AIO Headlight Polish w/3" Gray LC Thinpro pad on speed 6. It did absolutely nothing... I knew right then and there that this could very well be the mother of all headlights.
I've ran into difficult headlights to try and buff off, but nothing even remotely close to these.
 
You absolutely needed to sand those. A cute, little polishing kit will be a waste of time. Corvettes are pretty much in a class of their own. Good practice and hands on experience for you though.
 
You must log in or register to reply here.
Back
Top