94LT1
New member
- Mar 29, 2008
- 537
- 0
Well yesterday was the first time i ever detailed a black car and it made my mind up that i will never buy a black car EVER!
Short review for Wolfgang Duo 3.0:
I finally was able to use the Wolfgang TSR and FG 3.0.It was deffinetly more aggresive then pinnacles swirl remover and polish. It barely dusted as well. Only complaint i have is its really hard to wipe off after i made 5-8 passes after it broke down.I spent most of the day experimenting on how much product to use and ever time it was hard to wipe off after the polish broke down.But i would deffinetly recommend this product to the average joe.It wasnt hard to figure out and with some patients you can easily do alot of correction.I started to see results after i did the first wipe off after 5-8 passes.
I primed the pad with 3 lines like the directions said. After that i would use a nickle size amount or 3 pea size dots.I tried to wipe the pad off as much as possible to prevent the pad from cakeing up.After applying the product to the pad I started by wipeing the pad over the area i was going to work on.i then set my PC to 3 and worked the polish in.From there i set the PC to 5 and slowly moved it up and down and side to side for roughly 5-8 passes. After that id wipe down and inspect with my halogen lights.Some pannels needed more attention then others but i always saw improvement after i wiped the product off.
Black Impala Detail:
So i will start by saying my mom has owned this car since new and its a daily driver.I wish i would have taken before pictures because the outside was trashed.not her fault because i used to wax it on a regular basis but its hard for me to keep up with all 6 cars at the house.Iv always heard how much of a pita black is but never understood till i did this car.It took a total of almost 8 hours for the exterior alone.I started with a full wash down with meguiars gold class soap.Then i clayed the car.I had 2 do this in the sun so i re washed the car and brought it in the garage to dry and 2 continue my preperation.I started with KAIO by hand to remove the old wax.Wow wat a huge difference.It took all the cloudiness away and made the paint deeper.Then i started with Wolfgang 3.0 TSR with a orange pad.after 5-8 passes id wipe off the remaining and inspect the paint.I saw progress after ever wipe down.After about 6 hour my back and legs started to cramp up so i just used the finishing glaze in spots that were cloudy and had halograms.after that i topped everything with collinite 845.I applied meg#40 to all the trim and door moldings around the car.I also applied KAIO to the headlights and tailights.The wheels were cleaned with P21S gel wheel cleaner and a Mothers wheel brush.They were then protected with DG AW.The tires were dressed with Meg hot shine.So let me know what you think.
Short review for Wolfgang Duo 3.0:
I finally was able to use the Wolfgang TSR and FG 3.0.It was deffinetly more aggresive then pinnacles swirl remover and polish. It barely dusted as well. Only complaint i have is its really hard to wipe off after i made 5-8 passes after it broke down.I spent most of the day experimenting on how much product to use and ever time it was hard to wipe off after the polish broke down.But i would deffinetly recommend this product to the average joe.It wasnt hard to figure out and with some patients you can easily do alot of correction.I started to see results after i did the first wipe off after 5-8 passes.
I primed the pad with 3 lines like the directions said. After that i would use a nickle size amount or 3 pea size dots.I tried to wipe the pad off as much as possible to prevent the pad from cakeing up.After applying the product to the pad I started by wipeing the pad over the area i was going to work on.i then set my PC to 3 and worked the polish in.From there i set the PC to 5 and slowly moved it up and down and side to side for roughly 5-8 passes. After that id wipe down and inspect with my halogen lights.Some pannels needed more attention then others but i always saw improvement after i wiped the product off.
Black Impala Detail:
So i will start by saying my mom has owned this car since new and its a daily driver.I wish i would have taken before pictures because the outside was trashed.not her fault because i used to wax it on a regular basis but its hard for me to keep up with all 6 cars at the house.Iv always heard how much of a pita black is but never understood till i did this car.It took a total of almost 8 hours for the exterior alone.I started with a full wash down with meguiars gold class soap.Then i clayed the car.I had 2 do this in the sun so i re washed the car and brought it in the garage to dry and 2 continue my preperation.I started with KAIO by hand to remove the old wax.Wow wat a huge difference.It took all the cloudiness away and made the paint deeper.Then i started with Wolfgang 3.0 TSR with a orange pad.after 5-8 passes id wipe off the remaining and inspect the paint.I saw progress after ever wipe down.After about 6 hour my back and legs started to cramp up so i just used the finishing glaze in spots that were cloudy and had halograms.after that i topped everything with collinite 845.I applied meg#40 to all the trim and door moldings around the car.I also applied KAIO to the headlights and tailights.The wheels were cleaned with P21S gel wheel cleaner and a Mothers wheel brush.They were then protected with DG AW.The tires were dressed with Meg hot shine.So let me know what you think.
.