You are using in the same way I did except for the following: 1) I work outside 90% of the time. Usually in the sun. 2) I don't use wool pads, for 3D One I usually use a Lake Country HDO (either blue or orange) pad on almost the same machine you do: Griot's Boss G15. 3) I work half a panel at a time unless the pannel is huge, in this case I break it in either 3 or 4 sections. 4) For product quantity, I use 4 quarter size drops to prime the pad, then 2 pea size drops per section. I clean the pad after every panel.
My experience with wipeoff, has been nothing like yours. So either the product really hates the sun, which would be weird that oils would not come off the panel because of that, or something else is making the product unwipable. Maybe it doesn't like water? I clean my pads using water then dry them with rotation at speed 6. I use 2 to 3 pads per vehicle, I can't remember if the product did it when the pads was completelly dry or not, I would expect it did because I don't remember the issue developping during the correction. I reached out to Mark Barger who is the one who suggested the product to me, and he said it was harder to wipe than other products and suggested a 2 towel method, both dry.
