May want to step up to a more powerful DA

M

mcpp66

New member
Joined
Sep 6, 2009
Messages
1,308
Reaction score
0
I currently have the trusty PC 7424XP, but I may want to step up to something more powerful so that I can get work done faster. I'm guessing the best option would be to move up to the Flex 3401. What about the Cyclo? Or should I just stick with the trusty PC? Need some recommendations. Thanks!
 
If you are looking into a rotary i would recommend the Makita 9227c I have that and a PC7424xp i LOVE them both.
 
I love my FLEX machine. What I usually recommend is to stick with the PC if it's just for your cars. If you polish often then step up to the FLEX because it will save you time.

JMO, but I don't consider the cyclo a step up from the PC.
 
I should have bought the flex first a while back. Started with the PC, then bought the Flex anyway 2 months later.
 
I do feel that the Cyclo is a step or two above the PC. Even with that in mind the Flex is a giant leap above the PC. If you can swing the funds go for the Flex.
 
I realize that if you're not careful and mindful of what you're doing that there's a possibility of burning paint........how likely, or how possible is it to do that with this device?
 
mcpp66 said:
I realize that if you're not careful and mindful of what you're doing that there's a possibility of burning paint........how likely, or how possible is it to do that with this device?
Click to expand...

I say go for the flex! I love mine! And I dont feel that you have a big chance of burning the paint. I have never felt like I was in danger of doing that. As long as you use polisher common sense that you will be fine. I wouldnt let that keep you from the machine.

Best of Luck in your decidion!
Jon
 
I'll have plenty of time to decide.......my next order is going to be a big one and it's going to take a while for me to save up the cashola!
 
I started out with the PC and then went with the Flex about three years later. I now use the Flex for polishing, but I still use the PC extensively for polishing tight areas with 4" pads. The PC is also a lot lighter, which makes it much easier to use for applying LSP's. I guarantee you'll still be using your PC for various tasks even if you upgrade to the Flex.:xyxthumbs:
 
It sounds like it'll be a safe tool to use..........the only reason I haven't jumped on it yet is because I'm still a little fearful of it. I forget where I read this but I'm pretty sure I read where it's almost as powerful as a rotary.
 
mcpp66 said:
It sounds like it'll be a safe tool to use..........the only reason I haven't jumped on it yet is because I'm still a little fearful of it. I forget where I read this but I'm pretty sure I read where it's almost as powerful as a rotary.
Click to expand...

Don't be afraid, It is very safe. You did read something like that in an article by Mike but it sounds like you took it a little out of context. The Flex runs so smooth it scares me much less then my Griots did.... But yes, you definetly want to keep the pad flat and hold onto it.
 
The Flex is definitely on my list..........so are a lot of other things! So far the bill on all the things I want run upwards of $1700 so I think I'm to have to break it up into several smaller orders. I need to find AG-aholics Anonymous............I can't seem to stop!
 
Owning a PC, Flex, and a Rotary is a good thing. My favorite tool is the Flex, of the three.
 
Another vote for the 3401. I absolutely love mine. $300 may be steep but it's saving me minutes per panel over my old PC without the learning curve of a rotary. Very much worth it.
 
mcpp66 said:
The Flex is definitely on my list..........so are a lot of other things! So far the bill on all the things I want run upwards of $1700 so I think I'm to have to break it up into several smaller orders. I need to find AG-aholics Anonymous............I can't seem to stop!
Click to expand...

All for only ten easy payments of $170!:laughing:
 
There is a select group that seems to want to scare people away from the Flex. I know it is not the first choice for a beginner just because of cost and the pad size limitation can affect some. I have seen posts bringing up the felt ring issue as a major detractor.
 
Bunky said:
There is a select group that seems to want to scare people away from the Flex. I know it is not the first choice for a beginner just because of cost and the pad size limitation can affect some. I have seen posts bringing up the felt ring issue as a major detractor.
Click to expand...
I have the Flex 3401, and I thought the pad size limitation wouldn't be an issue before I bought it. Well, it is, IMO. The 3401 is a VERY well built tool and has awesome correcting power. I tried some of the newer DA's, most recently the G110v2, and I'm surprised what a big leap in terms of correcting ability compared to the older versions of some of these(G110v2, GG). :xyxthumbs:
 
Last edited:
You must log in or register to reply here.
Back
Top