Polishing glass

B

Baconz2012

New member
Joined
Jul 22, 2012
Messages
130
Reaction score
0
My brother has some nasty streaks on his window that are really instilled into the glass. They are mostly from the electric window system as well as heavy water sports and some minor swirling. Would I need to buy special pads/compound. Or could I use the ones for the paint as well?
 
Baconz2012 said:
My brother has some nasty streaks on his window that are really instilled into the glass. They are mostly from the electric window system as well as heavy water sports and some minor swirling. Would I need to buy special pads/compound. Or could I use the ones for the paint as well?
Click to expand...
Paint compounds will not get them out. Get some glass polishing pads with some Ceri Glass. Mike P has a thread on polishing glass with a rotary (messy job).
 
I'd like to know this too. I tried once with my DA and a glass pad and the Cerium Oxide paste and I don't think I made a dent.
I did find, however, that the cerium oxide works like magic on headlight lenses.
 
Baconz2012 said:
My brother has some nasty streaks on his window that are really instilled into the glass. They are mostly from the electric window system as well as heavy water sports and some minor swirling. Would I need to buy special pads/compound. Or could I use the ones for the paint as well?
Click to expand...


Plan on dedicating upwards of three hours minimum to the task at hand.
Again, YMMV
 
Low ball # guesstimate from previous experience...don't offer this service anymore....more power to those that do.

Windshield would be considerably more.
 
Baconz2012 said:
My brother has some nasty streaks on his window that are really instilled into the glass. They are mostly from the electric window system as well as heavy water sports and some minor swirling. Would I need to buy special pads/compound. Or could I use the ones for the paint as well?
Click to expand...

-This sounds like a side window, not the windshield...Is that right?

If so...
-Auto glass for windshields must be of a laminated-glass process.
-Auto glass for the side & rear windows is tempered glass

Both are "safety-glass", with different 'protection' provided from a person/animal being cut by their being broken:
-Windshield glass shards sticking to the sandwiched lamination material(s)...somewhat eliminating sharp edges.
-Tempered glass, being brittle, explodes and shatters into a zillion small oval-shaped pebbles when broken.
This eliminates the danger of sharp edges. You can still get cut, though

I'd use extra, extra caution on trying to polish tempered auto glass...especially using a buffer.
Any undo stress (going from "hot to cold" and back again, pressure, etc.)
may just be the undoing (explosion) of tempered-glass' inherent inclusions.

What I do is try to reduce imperfections by using something like Meg's #4 on a terry cloth applicator...
By Hand Only!!

After cleaning any "by-hand polishing residues"...
I'll further clean the tempered glass with a glass-cleaner like Sprayway/D120...and call it a day.

Most of these tempered glass blemishes (except perhaps some of the water-spotting)
are from the window rubbing up & down against dirty window seals. Try to keep those clean as well.

As with any procedure that you may be attempting...Please be careful.

:)

Bob
 
FUNX725 said:
-This sounds like a side window, not the windshield...Is that right?

If so...
-Auto glass for windshields must be of a laminated-glass process.
-Auto glass for the side & rear windows is tempered glass

Both are "safety-glass", with different 'protection' provided from a person/animal being cut by their being broken:
-Windshield glass shards sticking to the sandwiched lamination material(s)...somewhat eliminating sharp edges.
-Tempered glass, being brittle, explodes and shatters into a zillion small oval-shaped pebbles when broken.
This eliminates the danger of sharp edges. You can still get cut, though

I'd use extra, extra caution on trying to polish tempered auto glass...especially using a buffer.
Any undo stress (going from "hot to cold" and back again, pressure, etc.)
may just be the undoing (explosion) of tempered-glass' inherent inclusions.

What I do is try to reduce imperfections by using something like Meg's #4 on a terry cloth applicator...
By Hand Only!!

After cleaning any "by-hand polishing residues"...
I'll further clean the tempered glass with a glass-cleaner like Sprayway/D120...and call it a day.

Most of these tempered glass blemishes (except perhaps some of the water-spotting)
are from the window rubbing up & down against dirty window seals. Try to keep those clean as well.

As with any procedure that you may be attempting...Please be careful.

:)

Bob
Click to expand...

Whoa, I didn't know that. Thanks for the information bob!
 
Baconz2012 said:
Whoa, I didn't know that. Thanks for the information bob!
Click to expand...

You're welcome!

Another reason for side/rear auto-glass being tempered:

-In cases of emergencies, you can more easily break, (even by kicking sometimes), through tempered glass in order to exit a vehicle.
-Not so easily with laminated-glass.
-Makes sense, then, to have something like this stowed inside your vehicle:

Results for lifehammer - Search



:)

Bob
 
I don't know how bad the damage is, but before you go nuts, try poorboy's pro-polish with a white LC pad. It makes a big difference on a windshield. We were directed to try this at the poorboy's expo and it cleared up some relatively gross glass.
 
Recently used DG Nuglass on rear window of mid-sized SUV to remove water spots.
Not real nasty spots but annoying and not removed with best window cleaner.
Tried Nuglass with 3" GG DA & GG glass pads.
On other half tried Nuglass with 3" orange pad.
Same results per side, removed spots, polished nicely, easily.
 
Rsurfer said:
Paint compounds will not get them out. Get some glass polishing pads with some Ceri Glass. Mike P has a thread on polishing glass with a rotary (messy job).
Click to expand...

+1 for CeriGlass. The water spots will come out with just a few section passes and a foam pad. It will only take a few minutes per window. The scratches, on the other hand, will take hours to fully polish out. Dedicated glass polishing pads will be a must if you plan on putting a dent in any of the scratches in the glass.

Sent from my LG-VM701 using AG Online
 
I went through the whole thing of polishing my windshield using a DA, CerriGlass, and LC glass cutting pads. It cleaned the window, but left slight micro marring behind. I'm not sure why. Maybe I need glass polishing pads and a rotary.
 
I've done a couple vehicles recently with heavy water spots and chemical etchings. Used the Groits Garage glass polishing pads with the Detailer's High Performance Glass Restorer on my GG6 (speed 5). Removed 95% of the defects with 1-2 passes and 99.9% with multiple passes or a second application.
 
swanicyouth said:
I went through the whole thing of polishing my windshield using a DA, CerriGlass, and LC glass cutting pads. It cleaned the window, but left slight micro marring behind. I'm not sure why. Maybe I need glass polishing pads and a rotary.
Click to expand...

IMO the glass cutting pads (the thin, firm, fiber discs) are way more aggressive than would be needed for most situations. I think the glass polishing pads would give a better result with CeriGlass. My experience with the cutting pads is they are so aggressive with CeriGlass that they impart their own scratch pattern that then needs to be polished out with a softer pad.

Sent from my LG-VM701 using AG Online
 
Nicholas@Autowerx said:
IMO the glass cutting pads (the thin, firm, fiber discs) are way more aggressive than would be needed for most situations. I think the glass polishing pads would give a better result with CeriGlass. My experience with the cutting pads is they are so aggressive with CeriGlass that they impart their own scratch pattern that then needs to be polished out with a softer pad.

Sent from my LG-VM701 using AG Online
Click to expand...

Would a regular polishing pad work or does it have to be a glass polishing pad?
 
Nicholas@Autowerx said:
IMO the glass cutting pads (the thin, firm, fiber discs) are way more aggressive than would be needed for most situations. I think the glass polishing pads would give a better result with CeriGlass. My experience with the cutting pads is they are so aggressive with CeriGlass that they impart their own scratch pattern that then needs to be polished out with a softer pad.

Sent from my LG-VM701 using AG Online
Click to expand...

I agree with you 100%. The thing is, a lot of people are using this product to "clean up" or heavily clean years of gunk on their windshield. Kind of like decontaminate it.

My goal was to use it to polish out the swirls and scratches out of the glass. At that, I was only moderately successful. I wish someone could give me a combo (if it exists) Thant can remove light defects in glass, but finish defect free.

I don't think foam is aggressive enough to do that. Maybe you need to try it with a rotary, which I don't have. I'm thinking about giving it another try with the Griots glass POLISHING pads and a cheap rotary. However, those pads look a lot like the LC glass cutting pads, so I'm not sure if they are just rebranded.

Anyone remove paint like defects (swirls or scratches) from last and get a defect free finish? If so, what did you use?
 
You must log in or register to reply here.
Back
Top