Post Your Unpacking Pictures

UPS just stopped by again…. dropped off all my Carpro Suede applicator and buffing towels for the Opti-Gloss Coat! :D

unboxing12.JPG
 
Super excited to get my order. Already tried the hyper dressing in my vette interior.
Towels are all being washed right now :-)
 
Awesome led headlamp. Came with rechargeable batteries and charger for $25 shipped (most don't include the batteries so read description)
 
Hey David, I've had my eye on that Hyper Dressing for sometime now.

Just curious…. after you applied it, did you notice if it dries completely or does it leave the area feeling oily?

I live out here in the desert where dust is a serious issue so i try not to use products that accumulate or attract dust and dirt.

Thanks in advance!
®ick~
 
It's seem dry to the he touch compared to the previous products I've tried. Pm me your info and I'll send you a sample
 
I received my McCulloch MC1375 today! I can't wait to give it a try tomorrow. Any tips on using a steamer?

1204141631b_zpsaff7062b.jpg
 
Goin Rogue said:
I received my McCulloch MC1375 today! I can't wait to give it a try tomorrow. Any tips on using a steamer?

1204141631b_zpsaff7062b.jpg
Click to expand...

When you hit the trigger for the 1st time beginning each use, a stream of water may shoot out for a few seconds instead of steam.

Congrats on the purchase. Steamers are a great addition
 
Daviddear30 said:
Awesome led headlamp. Came with rechargeable batteries and charger for $25 shipped (most don't include the batteries so read description)
Click to expand...

That sucker looks like a beast! On the day before Thanksgiving my local Ace Hardware had the Coast 175 lumen headlamp on sale for $10. Needless to say, I cleaned them out. They make great gifts! My life must have been very "dim" before I discovered them. :xyxthumbs:
 
Here is the first two boxes of 9 or ten I should be receiving from the Black Friday/Cyber Buster sales!
 
Well, my brother was in Germany last week and he was sure to bring me a few 'Made in Germany' Products:

beeningermany.png


From left to right, 8oz Menzerna SHC300, 32oz SHC300 x 2, 8 oz FF3000 x 2 (he got on BOGO!), Menzerna Polishing Cream Rosa, and two Microfiber Madness products, Incredipad and Mitt!

Looking forward to put everything to work soon next week!

Kind Regards.
 
Tato said:
Well, my brother was in Germany last week and he was sure to bring me a few 'Made in Germany' Products:

beeningermany.png


From left to right, 8oz Menzerna SHC300, 32oz SHC300 x 2, 8 oz FF3000 x 2 (he got on BOGO!), Menzerna Polishing Cream Rosa, and two Microfiber Madness products, Incredipad and Mitt!

Looking forward to put everything to work soon next week!

Kind Regards.
Click to expand...

Tato, VERY nice! :xyxthumbs::xyxthumbs:
 
Daviddear30 said:
Super excited to get my order. Already tried the hyper dressing in my vette interior.
Towels are all being washed right now :-)
Click to expand...

A tip in case you didn't know. If you're using the dilution ratios listed on the bottle. Fill with water to the black line for your particular dilution ratio. Then fill with the chemical to the circular line just above the label. This will be well before the bottle reduces at the neck.
 
Haven't you guys heard....medium cut polishes are obsolete

Stop buying that Junk!
 
allenk4 said:
Haven't you guys heard....medium cut polishes are obsolete

Stop buying that Junk!
Click to expand...

Dear Kyle, I've just read your input on another thread:

"when you have to cut so hard with a wool pad that what is left behind would be more quickly corrected with a medium cut polish followed by a finishing polish"

This is very consistent with recommendation I've seen when decided to grab FF3000 to finish SHC300 out.

Here:

Im Gegensatz zur SF4000 entfernt die FF3000 bereits Schleifspuren ab Körnung P2500, welche üblicherweise beim Nacharbeiten von Fehlstellen zurückbleiben.

Menzerna empfiehlt die Kombination aus Schleifpaste FG400 und FF3000 für einen effizienten, optimalen Finish-Prozess im Handwerk.
source: menzerna FF3000 Final Finish im carparts Online Shop


In summary, the above says FF3000 is slightly more abrasive than SF4000, being able to remove grit P2500. This helps removing trace / missing defects that may remain after the compounding step. It's recommended by Menzerna as a follow up to FG400.

Also guarantees an hologram free, mirror-finish (not wrote above, but at product page).

That said, I'm reading your comment as a 'funny comment'? Hope I'm right hahahh

Thanks for chiming in.

Kind Regards.
 
Correct

It was an attempt at levity

I am a Fan of Medium cut polishes, especially on harder paint she doing a 3rd polishing step is not an option due to time or budget constraints

As you probably know, when Menzerna states that FG400 will remove 1200 grit sanding marks, they are speaking of fresh paint on the assembly line

Do all of the polish makers use fresh paint as their yard stick?
 
You must log in or register to reply here.
Back
Top