Sonax on paint?

K

kimokalihi

New member
Joined
Apr 14, 2013
Messages
71
Reaction score
0
I see a lot of people using ironx on their cars before claying to help dissolve iron particles and make claying easier and safer. Can I use sonax full effect for this? I see that it also breaks down iron particles and I happen to have a few bottles of it already but no ironx.
 
Same basic principle, I believe the Sonax might well have been the first product of this type.

Whilst that may be true... beware the instructions because I do not know whether there are other ingredients which make it unsafe on paintwork (however unlikely it may be).
 
I would use IronX instead of Full Effect for your application buddy . Just a safe side . But surely some will chime in on that if FE s safe also .
 
Looking at the MSDS there is nothing listed which would worry me. What I would note is that:

1) The active concentration is notably lower than IX
2) Sonax have classified the product differently to most - apparently due to some animal testing.
 
i think that ironx would be cheaper per ounce and more efective,i will say i remember someone else brought up the same question couple years ago.
 
I prefer Wolfs Deionizer as you can let it dry on paint, IronX you can't (at least not the one I have)
 
I have used Sonax on the paint once just to see if it worked, and it does, but not anywhere near as good as iron-x or iron out.

It will also be more costly as you will need a lot more product to get even close to the effectiveness of a dedicated iron remover.
 
I think its safe to say its not the most cost effective/EFFECTIVE product for the job then. Ill order some ironx thanks guys. Was only hoping to save some money and use up this sonax.
 
AeroCleanse said:
I prefer Wolfs Deionizer as you can let it dry on paint, IronX you can't (at least not the one I have)
Click to expand...

In practice you can let it dry and it won't do any more harm than de-ironiser. There is really only one big difference between the two products but the ingredients list is basically the same.

lawrenceSA said:
I have used Sonax on the paint once just to see if it worked, and it does, but not anywhere near as good as iron-x or iron out.
Click to expand...

Iron Out is moderately acidic - Sonax/IX are pH neutral. Personally I think acidic fallout removers and pH neutral belong in a different group.
 
Mr Megane said:
In practice you can let it dry and it won't do any more harm than de-ironiser. There is really only one big difference between the two products but the ingredients list is basically the same.
Click to expand...

De-Ionizer smells better, IMHO
 
AeroCleanse said:
Or they have done a good job at masking it.
Click to expand...

In truth the smell depend upon the grade of raw material. However, as a chemist (and hopefully AG don't object to my saying so), IX is demonstrably more concentrated and, in this case, that is the reason IX smells worse.
 
Mr Megane said:
In truth the smell depend upon the grade of raw material. However, as a chemist (and hopefully AG don't object to my saying so), IX is demonstrably more concentrated and, in this case, that is the reason IX smells worse.
Click to expand...

Without knowing the chemical makeup of each product all I can say is that I find Wolfs to work better.
 
You must log in or register to reply here.
Back
Top