Website is up!

[Kristopher1129]

I am interested in what process are you executing for Headlight Restoration service.
Thanks :xyxthumbs:

He's probably referring either applying opti-coat, or some sort of urethane acrylic.

I do the same thing, except I don't up charge for it. I charge $50 for the pair, and do the urethane. The way I see it, it only takes me about 30 minutes or less to do the whole thing. $50 for a half hour worth of work is good money. Plus, keeping it at just $50 makes the service more apt to sell.

 

[petermk]

Remove the Twitter, YouTube and Testimonials buttons. They don't go anywhere, so remove them until you actually have pages to point those buttons to.
I am not sure what you're trying to show with the two bucket picture in the Our Work gallery.
Also, the 4 links in the footer - Regular Wash, The Works, etc. should be anchored to their respective sections on the Services page instead of simply pointing to that page.

 

[SkateForGirl]

Awesome Job!

 

[GalKonz]

He's probably referring either applying opti-coat, or some sort of urethane acrylic.

I do the same thing, except I don't up charge for it. I charge $50 for the pair, and do the urethane. The way I see it, it only takes me about 30 minutes or less to do the whole thing. $50 for a half hour worth of work is good money. Plus, keeping it at just $50 makes the service more apt to sell.

I use urethane, too. I charge between $35 to $50. I agree with you about 50 for half an hour, is pretty good money! Even though it takes me about an hour, or an hour and 20 minutes. I offer a Mobil Headlight Resto Service.

Do you wetsand, and apply spar urethane? Or do you wetsand, buff, and apply spar urethane? Wich sandpaper grits do you use?

 

[feslope]

He's probably referring either applying opti-coat, or some sort of urethane acrylic.

For that kind of upcharge and a 5 year guarantee I'm thinking maybe a UV cured product like Lightrite or Speedocote.

 

[Kristopher1129]

I use urethane, too. I charge between $35 to $50. I agree with you about 50 for half an hour, is pretty good money! Even though it takes me about an hour, or an hour and 20 minutes. I offer a Mobil Headlight Resto Service.

Do you wetsand, and apply spar urethane? Or do you wetsand, buff, and apply spar urethane? Wich sandpaper grits do you use?

I dry sand, wet sand, and apply urethane after 3000. There's really no need to compound and polish if you're applying the urethane anyways.

 

[GalKonz]

I dry sand, wet sand, and apply urethane after 3000. There's really no need to compound and polish if you're applying the urethane anyways.

I go up to 2500, and then clean/prep surface with OMS, and finally apply spar urethane. The reason why i don't use 3000 is 'cause i can't find any 3000 grit sandpaper here in my Country (I am not from USA).

I usually use 400, 600, 1000, 1500, 2000, 2500. Sometimes i meet headlights with paint transfers or many heavy scratches, in that cases i start with 220 or 320. Do you think i can skip in the process any grit? What i want is to minimize the time and effort needed.

Do you use any sanding block, or alike?

Thanks :xyxthumbs: