What should I use to measure 1 ounce?

I transfer my ONR to this container I got from US Plastics

CIMG0238.jpg


Also, AG sell Problend bottle proportioners that work well with gallon and quart bottles.

One of my favorite methods too! :props:
 
Oddly enough, a one ounce container seems to work quite well.
:laughing::laughing::laughing::laughing:
 
I use a pumper top that replaces the regular top on one gallon containers. A full pump is one oz. There are also 3/4, 1/2,1/4 marks on the pump stem.
 
I just bought these and used them, sure made things easy. One for gallons and one for quarts.
Pro Blend Bottle Proportioner Combo

Dave
I love the quart size, I have them for ONR, DP RW,MicroRejuvenator, and they are no spill, no mess! I dilute Car Wash 2 to 1 and dispense 3 oz into the bucket to get an ounce of wash. Dispenses easier for high viscosity washes. also great for diluting APC. Gallon size is too big IMO. The Home Depot $1 bottles work great with the QT Pro Blend. Ultima Concentrate comes in the 2 neck bottles shown above and are reusable. Another reason to love Ultima!
 
Last edited:
I THOUGHT that US Plastics sold them, but someone on here asked about buying a bottle like that and I couldn't find it! Cheap, too.
Setec you thought right you will find them in thier lab section . They have 8,16,32,oz range from 1.28-2.38:xyxthumbs:
 
I went the cheap route I cut off the bottom of a small bottle and marked the side at 2oz. But for a couple of bucks the shot glasses would make a great upgrade.
 
I use the OXO Mini Measuring Cup, measures 2 ounces and easy to read from the top because the OZ. markings are on the angled surface.

Get them from Bead Bath & Beyond with 20% off coupons you get in the mail.

30032184.jpg
 
I use the OXO Mini Measuring Cup, measures 2 ounces and easy to read from the top because the OZ. markings are on the angled surface.

Get them from Bead Bath & Beyond with 20% off coupons you get in the mail.

30032184.jpg

Someone on the forum also posted this OXO in stainless steel. I have this plastic unit and would like to have the steel unit if I can find the post. The OXO site shows them for $5.99 but they might be found at a local box store (Target,Wal-Mart etc.).
 
Last edited:
I transfer my ONR to this container I got from US Plastics

CIMG0238.jpg


Also, AG sell Problend bottle proportioners that work well with gallon and quart bottles.
Agree! These bottles rock. Nothing to rinse/clean! I just bought about 1/2 dozen from another site.
 
i've been using the little medicine measuring cups for a while and there's a plastic supply store near me where i get them for around $.15 each. another option i've also used is the clear liquid detergent cups and they have numbers with lines from 1-3 which is in ounces. 3 ounces is more than enough for me since car washes are so concentrated these days...
 
If nothing else...2 tablespoons = 1 ounce. I think you probably have a TSpoon lying around.
 
Someone on the forum also posted this OXO in stainless steel. I have this plastic unit and would like to have the steel unit if I can find the post. The OXO site shows them for $5.99 but they might be found at a local box store (Target,Wal-Mart etc.).
Found plastic version at K-Mart for $3.99
 
I bought an 8oz cheapo squeeze bottle from a beauty supply place. Marked it off with a marker at 1oz intervals adding 1oz of water at a time.

Filled it with ONR and now it only takes a couple of squeezes in to the wash bucket.
 
I bought an 8oz cheapo squeeze bottle from a beauty supply place. Marked it off with a marker at 1oz intervals adding 1oz of water at a time.

Filled it with ONR and now it only takes a couple of squeezes in to the wash bucket.

I did the same thing with the AG squirt bottles. Nice and easy when i go on a job.
 
Back
Top