JohnnyDetails
New member
- Feb 25, 2013
- 4
- 0
Picked up a CR Spotless DIC 20 rolling system. I got a great deal on it, I put it together tonight and will be running some tests tomorrow and putting it through it's paces.
Installation was very simple.
View attachment 16005
View attachment 16006
View attachment 16007
View attachment 16008
As you can see within the box there were the pre-assembled rolling unit which includes the inlet and outlets connects as well as the digits TDS (total dissolved solids) meter.
Inside the main box there is a small plastic bag which contained:
Instruction and quick assembly guide
2 PVC white couplings
2 large washers
2 wire rings
1 small role silicone tape
1 plastic pipe wrench
1 orbit spray nozzle
2 gilmour plastic quick couplings
1 stainless inlet house
View attachment 16009
1. Wrap silicone tape around ends of each PVC coupling and then screw in a coupling in the inlet and outlet of the rolling unit.
View attachment 16011
2. Place one washer in the bottom of the blue filter cartridge housing
View attachment 16010
3. Place the white filter cartridge in the blue filter cartridge housing
View attachment 16012
4. Place a metal ring on top of the white cartridge.
5. Screw the assembled blue filter cartridge housing into the Rolling unit. This was the most difficult part because the blue housing is quite heavy when assembled, so it took a little bit of effort to lift it and screw in the cartridge into the rolling unit.
6. Repeat for the second blue filter cartridge housing.
7. Attach the stainless house to the inlet coupling
View attachment 16013
View attachment 16014
I am looking forward to testing the system tomorrow and posting my impressions tomorrow.
Installation was very simple.
View attachment 16005
View attachment 16006
View attachment 16007
View attachment 16008
As you can see within the box there were the pre-assembled rolling unit which includes the inlet and outlets connects as well as the digits TDS (total dissolved solids) meter.
Inside the main box there is a small plastic bag which contained:
Instruction and quick assembly guide
2 PVC white couplings
2 large washers
2 wire rings
1 small role silicone tape
1 plastic pipe wrench
1 orbit spray nozzle
2 gilmour plastic quick couplings
1 stainless inlet house
View attachment 16009
1. Wrap silicone tape around ends of each PVC coupling and then screw in a coupling in the inlet and outlet of the rolling unit.
View attachment 16011
2. Place one washer in the bottom of the blue filter cartridge housing
View attachment 16010
3. Place the white filter cartridge in the blue filter cartridge housing
View attachment 16012
4. Place a metal ring on top of the white cartridge.
5. Screw the assembled blue filter cartridge housing into the Rolling unit. This was the most difficult part because the blue housing is quite heavy when assembled, so it took a little bit of effort to lift it and screw in the cartridge into the rolling unit.
6. Repeat for the second blue filter cartridge housing.
7. Attach the stainless house to the inlet coupling
View attachment 16013
View attachment 16014
I am looking forward to testing the system tomorrow and posting my impressions tomorrow.